|
Originally Posted by scionista
[clip!]
Easy parts: Taking the existing grille out. Installing the new grille. Installing the lights in the new grille. Attaching the wiring harness in the dash. Difficult parts: Removing the two panels underneath the car. Getting the clips in on the new grille. Hooking up the wiring harness in the fender well. Routing the harness up to the top of the bumper. Securing the harness in place. Replacing the two panels underneath the car. Aiming the lights. [clip!] https://www.scionlife.com/tech/fog_lights_tc/2866.jpg Help! I don't want my fogs falling out on the highway! :nails: |
Hrmm, couldn't edit my first post... :eyebrow: Anyways, I took a closer look at your first picture with the "clips" and those looked nothing like the ones in my kit! The clips that mine came with were like those kinds that clip onto the edges of body panels, and accept a screw through it. No wonder! :flame: Anyone know if the correct clips can be ordered seperatly, and if so what the part number is?
|
has anyone found out how to wire the Fogs without the Headlites on?
If someone can PM or e-mail me a schematic, I will figure out if the headlight supplies a ground or hot to the fog relay, or the switch, and do a write and pics for you guys. |
Originally Posted by 04ctd
has anyone found out how to wire the Fogs without the Headlites on?
If someone can PM or e-mail me a schematic, I will figure out if the headlight supplies a ground or hot to the fog relay, or the switch, and do a write and pics for you guys. https://www.scionlife.com/forums/viewtopic.php?t=70203 Scroll down to the post by icdedppl on Thu Jun 30, 2005 5:59 am with pics. |
Give me some help guys, whats the best way to run wires from the engine area to the switches area. There seems to be no opening into the firewall I can access, I need to install a siren lol
|
You can use light bulbs of model 168 or 194 with blue or silver coating to replace the parking light bulbs.
Originally Posted by JimAllison
Nice job with the fogs. I really like the color of your headlights so I went out and bough some Silverstars today.
Has anyone found a "whiter" replacement for the parking lights? Thats the only part messing up the color on my new lights. I couldn't find any bulbs to those specs at the auto parts store. - Jim |
you payed way to much for those fogs
|
nice post
|
you do realize those exact fogs are on ebay for 100 dollars. :rofl: just a heds up .. check out ebay first youd be amazed. i am all the time
|
anyone know if HID's will fit for this foglight set up?
|
yes.
find right bulb size.. and install.. oem fog lights use 9006. |
Hey guys, just put in the silverstars and installed fogs on my car. The hardest part was gettng the ground taken care of. I am a big guy and getting in there was not fun. On top of that, it was pretty dam cold today in NYC. Anyway, thanks for the write up. I will post some pics tom. of the car up against the wall with the silverstar ultras.
|
im getting some oem fogs with yellow bulbs soon
i might have some questions (nooob) |
Nice DIY Thread! Very Helpful!!
|
im installing my OEM's tomorrow. This thread makes it look so easy!
|
hmmm.. ill use this guide to installed my VRDs
|
anyone know where to get the relay used in this install?
|
yeah, i didnt have jackstands or a jack to get my car up for my VRD install, and i did it in my cold garage. not fun at all.
|
did your vrds come with the relay for the fogs?
|
Originally Posted by rrimportracer
did your vrds come with the relay for the fogs?
|
| All times are GMT. The time now is 12:29 PM. |
© 2024 MH Sub I, LLC dba Internet Brands