I did this with my xA. Much of the disassembly of the console was the same. I couldnt find the rubber light covers in blue (AutoZone and Pepboys can suck it) so i attempted to use blue permanent marker. So far, seems to work. I am concerned about the bulb temperature burning off the ink, however. (Thats what happened when I tried the permanent marker on the dome light.)

I can take pictures of the process if anyone wants them. Shouldnt need them though, taking the thing apart is pretty cut and dried if youre cautious and look before you start yanking on stuff.

UPDATE:
Blue permanent marker is too dark. Gonna try turquoise. Guess its a hit or miss thing. Im thinking I might just have to jerry rig a series of LEDs into the console. Why Toyota tried to route such a low-wattage light through cheap clear plastic is beyond me... seems to be a stupid way to do things.

how do you take off the xA's front panel? I don't want to break it.

GeneShaft

Do you know if this would work on the tC as well?

-pull off the silver sides
-remove left and right knob
-remove screws behind two knobs
-lift up the piece from the bottom of where the knobs are, this piece extends up to where the stereo is

hope that helps :)

but very carefully :D

the silver accents may scratch your AC panel if you pull too hard...

also, watch out for the little ball bearing in the center knob assembley (it's greased up) That's the key to the CLICKY!

replacment keds
 

http://www.superbrightleds.com/index.htm

why no just go here and get whatever color leds you want
direct fit or replacement :idea:

anyone got a part number for this thing?

i work for michaels scion in bellevue WA.
there is no separate part number for the little led's behind the dash or speedo

sorry :(

Dash Light a/c control
 

cool pics. i think i can handle that. .. wish i woudl have done it when i put in my JVC head unit, does it look like you could pull the bulb out of the gray colored base? .. i changed the color of my shifter console bulb from whtie to red LED.. bulb #74 if those are the same they should pop in if the gray base pops off
2005 XB thundercloud metallic http://members.sounddomain.com/silyotter

Dash Light a/c control
 

cool pics. i think i can handle that. .. wish i woudl have done it when i put in my JVC head unit, does it look like you could pull the bulb out of the gray colored base? .. i changed the color of my shifter console bulb from whtie to red LED.. bulb #74 if those are the same they should pop in if the gray base pops off
2005 XB thundercloud metallic http://members.sounddomain.com/silyotter

i found some blue light bulb covers at autobarn.com

clock light
 

anyone know how to change the light behind the clock cuz if u chance the a/c controls to any color then the clock wont match it.

stephen hull
2005 black xb

As I was too lazy to buy the bulb covers (it was late) I just used a sharpie on some scotch tape and taped the bulbs with that. Seems to work from what I could see so far, might be a little dark though.

mine turned out sweet thanks for posting it

https://img.photobucket.com/albums/v...nlife89/ac.jpg

scionlife89, did you use the bulb covers?

Speedhut.com LEDs
 

Go to www.speedhut.com and into their "accessories" section and click on the "6 high bright LEDs button. Here's what it says about them:

6 High Bright LEDs

Set of 6 LEDs. These LEDs will replace factory bulbs and change the stock lighting to a blue, red or green color. Use These LEDs to replace your stock bulbs to a different color. These LEDs never burn out. Most cars have 6 or less bulbs.

https://www.speedhut.com/images_products/LED-kit.jpg

Wonder if these would work for the dash lights and what not??? Is somebody willing to get them and try them?

When I go to Autozone what do I ask the clerk? Where are your rubber bulb cover things? What i'm getting at, is there a more technical name that will not make me look like the dumb blond?

go to autobarn.com in the search box put light bulb covers.

covers
 

well i just put my blue light bulb covers.have to wait till tonite to see how it looks.now how i`nm i going to change the shifter and the clock light to blue.

on button
 

ok,now the on button just slides into the next slot.before it used to click into the next slot.i as careful on removing the thing. :oops: :cry: