does anyone know where i can find a set of 12mm wheel spacers? Ichiba only has 10mm,15mm i need a 12 to get my front offset to +23 8) I was originally going to go with the 15mm but according to the wheel fitment guide, i would be poking. im on 19x8 +35 on 215/35 stretched. thanks guys

Do these exist? Try H&R?

mmm, i dont think 3 mm would make that much of a difference.

Well depending how low you are, you might be able to get away with that 3mm or probably raise it a hair to reduce the rubbing?

You probably wont find a 12mm. Maybe use a 8mm +5mm.

Go with the 15mm. There is nothing wrong with a lil poke..its sexy! You should post your ride here...
http://scionlife.com/forums/showthread.php?t=173470&highlight=tc+19's

mmm, i dont think 3 mm would make that much of a difference.

Well depending how low you are, you might be able to get away with that 3mm or probably raise it a hair to reduce the rubbing?

You probably wont find a 12mm. Maybe use a 8mm +5mm.

Im on s-techs i guess a lil poke is fine but hopefully the rear will poke a lil too lol

try ebay

does anyone know where i can find a set of 12mm wheel spacers? Ichiba only has 10mm,15mm i need a 12 to get my front offset to +23 8) I was originally going to go with the 15mm but according to the wheel fitment guide, i would be poking. im on 19x8 +35 on 215/35 stretched. thanks guys

Buy the 15mm spacers and take them to a machine shop and have them machine 3mm off the back side. I have done this on a few different cars and it only cost $10.00 a piece.

-Jeremy

might do that thanks buddy

do 15mm, the 23 was set by my old setup anyway, and i wanted to go 3mm flusher so +15 all the way

sweet man u think 25mm in rear will be good? it will be +10 :wink:

the lower the offsets..the better