i heard about new headlights coming out for the xB that have angle eyes? is this true?

There has been a set out for a while now, check ebay...

There's a thread about one of them here
http://www.scionlife.com/forums/viewtopic.php?t=46346

http://www.namotorsports.net/images/02-AZ-SB03-PBC-RIM.jpg

http://www.scionlife.com/gallery/data/500/11526MVC-020F-med.JPG

http://www.scionlife.com/gallery/data/500/11526MVC-020F-med.JPG

Those look expensive if they break? What is the size of the grill light, btw. Since I am going to need to know.

Chad

Those look expensive if they break? What is the size of the grill light, btw. Since I am going to need to know.

Chad

The opening is 3 3/4" across,
BTW I took one of my other club members by the pinstripers yesterday to decide what he is going to get done to his box. I talked to him about the Rockblocker and he is very interested in checking it out. We are going to be there for a couple of hours today while he stripes the other guys box, so we will talk some more.

i want one of those so badly, i can put a HID in it too :wink:

I like those ones better without the bar at the top...Nice choice.

anyone switch the led bulbs out wit a different color yet?

i have these lights as well

i have to ask if anyone else had a problem with fitment near the fenders( lens overlaps fender ), Washer Bottle (had to zip tie filler neck to motor mount bracket as it was hitting bulb connector and would not allow headlight to seat ), both LF headlight bulb locking rings had to be rotated 45degrees to allow connectors to clear the factory battery and the fuse box, both will contact as installed without this modification

they aslo do not have the same bracket for the bumper to clip onto, just a blank tab

other than that they are very nice

I am running Nokyo purply bulbs
Ill get pics later and post

These really aren't the best made lights. I have had most of the problems you are talking about plus my left one is starting to fog up when there is a lot of rain.
I am really hoping someone will come out with a better made set that is similar looking. I never reccomend them to anybody anymore.

i havnt had any problems wit them that are major only a lil foggy it was a simply install and quick upgrade of the silverstar's and hopefully the leds will be next......

which lights are u guys referring to with the fog issues and fitment issues ?

the new ones with the BROW or the dual proijector ones with the 3 leds dots at the bottom right ?

thanx

the second one..........the one in the picture ^^^^ uo there.

i was talkin about the daul halo ones the second one wit led's NOT the eyebrow one

http://images.channeladvisor.com/Sell/SSProfiles/30061971/Images/dualhaloB.jpg

Link to the auction. http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&rd=1&item=7959100402&category=33710

What about these? Anyone have any clues on the look or performance of these?

Those are the exact same lights we have been discussing,

do those come in xeion?

oh, I looked at the first picture. Didn't catch the ones installed on that XB. Sorry.

no XENON, they are merely "projectors"

what did you wire the LED's and Halo's to??

i have mine on the park light with a switch
so its on with parking lights or not on with park lights

no one else had prob's with washer bottle or battery??
is my box just weird??

I didn't have problems with the washer bottle or battery.
I wired mine directly to the parking lights.
I am going to rewire them when my are gets out of a cast though. I want the leds to blink with the blinker and I want the halos (including my grill halos) to be on a totally different switch.

The opening is 3 3/4" across,
BTW I took one of my other club members by the pinstripers yesterday to decide what he is going to get done to his box. I talked to him about the Rockblocker and he is very interested in checking it out. We are going to be there for a couple of hours today while he stripes the other guys box, so we will talk some more.

Cool. BTW, what is the name for those lights in the grille piece. I am looking to name them for the site.

Thanks

Chad

That is a piece made by ABS. They call them fog lights. I call them driving lights because they are really to too high to be fog lights.

That is a piece made by ABS. They call them fog lights. I call them driving lights because they are really to too high to be fog lights.

tanks

thems the bomb

$40 for shipping!!! :doh: NO WAY talk about rip off..... shipping from cali to Va would take 7 days and cost $18 max (used to be shipping manager for 4 years)

ebay sellers do not have to pay any percentage or fees on shipping, thats why a lot of places charge so much. Look at the poker chips market, they are notorious for excessive shipping charges. Here's an example:

http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&category=70959&item=6163439514&rd=1

$47 shipping

ebay sellers do not have to pay any percentage or fees on shipping, thats why a lot of places charge so much. Look at the poker chips market, they are notorious for excessive shipping charges. Here's an example:

http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&category=70959&item=6163439514&rd=1

$47 shipping

Thats awesome! I can't believe people actually buy that ____.

http://img.photobucket.com/albums/v509/hotxb990/xB990pro1.jpg
http://img.photobucket.com/albums/v509/hotxb990/xB990pro2.jpg
http://img.photobucket.com/albums/v509/hotxb990/xB990pro3.jpg
http://img.photobucket.com/albums/v509/hotxb990/xB990pro4.jpg
http://img.photobucket.com/albums/v509/hotxb990/xB990prolight1.jpg
http://img.photobucket.com/albums/v509/hotxb990/xB990pro6.jpg

I really think thoses^^^ would look cool with some eyelids.

Very nice ride by the way. :clap:

Yes They are I purchased and intalled the same ones today...

Im getting some when I get my credit card approved LOL

Hello, new member and xB owner since Friday. I just ordered headlights like these and I was wondering about installation. I read the tech article about whiting out the corners, and it looks like you have to take off the front grill and bumper just to replace the headlights. Is this true?

Thanks in advance for the help.

Hello, new member and xB owner since Friday. I just ordered headlights like these and I was wondering about installation. I read the tech article about whiting out the corners, and it looks like you have to take off the front grill and bumper just to replace the headlights. Is this true?

Thanks in advance for the help.Yes.

i have a set of the ones w/ LED's (in black) that im looking to sell... iv'e had them on for less then 2 weeks... anyone interested?... i'll give you a good price...

Thanks for the answer. Direct and to the point, that's what I like.

My new headlights should be here soon. Dual halo with the black housing, $147 shipped, so I'm happy about the cost.

Is it really as much of a pain as it looks to pull the front end off? What kind of time commitment am I looking at here?

I hope swapping out the tail lights is easier...

Thanks for the answer. Direct and to the point, that's what I like.

My new headlights should be here soon. Dual halo with the black housing, $147 shipped, so I'm happy about the cost.

Is it really as much of a pain as it looks to pull the front end off? What kind of time commitment am I looking at here?

I hope swapping out the tail lights is easier...

The bumper takes about 15 minutes to take off, tops.

The taillights are very easy.

Got my new headlights today. Very cool.

I was wondering, for those of you who have installed them in your xB's, any words of advice you can give?

Also, where/what do I connect the individual lines to for the led's and angel eyes?

If you could post it here or email it to me, I'd be forever in debt. I could even take pictures of the process myself to post in the tech section.

And one final question. Any idea what size the led bulbs are and if I can replace them with other colors? Same with the turning blinker?

Sorry to sound like such a novice, but I am one. I appreciate everyone's help.

Got my new headlights today. Very cool.

I was wondering, for those of you who have installed them in your xB's, any words of advice you can give?

Also, where/what do I connect the individual lines to for the led's and angel eyes?

If you could post it here or email it to me, I'd be forever in debt. I could even take pictures of the process myself to post in the tech section.

And one final question. Any idea what size the led bulbs are and if I can replace them with other colors? Same with the turning blinker?

Sorry to sound like such a novice, but I am one. I appreciate everyone's help.

here:
The projectors are plug and play though. The splicing for the led's and halos is really easy. It was my first time splicing and I had no problem. If you want the led's in with the corner lights, splice them into the green wire with the orange stripe.....If ya want the led's to blink woith the turn signal, put them in the green wire with the silver dots.

if you do a search for "dual halo projectors" you can get more info.

Thanks again for the info. I did find just about everything I needed.

One question, and I'll just float this out there because I don't remember reading it anywhere.

Anybody have any ideas on how to rig the halos to be daytime running lamps?

I see where you can connect them to the parking lights, but I'd rather they be on whenever the car is on. Also, that way, the turn indicators wouldn't be on while the halos are on.

Once again, I appreciate your input and your patience. I'm learning, slowly but surely.

theyve been on ebay for ages