Hey guys i know there is like a million posts on this but i just wanted to ask.

Should i us a Impact gun or a Torque Wrench to install my Cranky Pulley? I have seen some DIY where people use both so if i don't have to rent a Torque Wrench i would rather not to save some money.

Does it have to be Torque or would it be safer? Or would a Impact gun be okay?

Thanks

 

ive used an impact on them all the time

 

Impact.

 

Make sure you get a belt much longer than they suggest...

And impact

 

Both, make sure its torqued to the proper setting, its a pain trying to keep the crank still through while you do. I would not recommend using a lightweight crank pulley or anything other than OEM or ATI Super damper.

 

Okay well im just going to use the Impact Gun to save some money for now I think i should be fine even if i dont torque it.

Does any one know what size belt im going to need off hand. I know i can find it i just haven't looked yet if you dont no big deal ill find it.

Thank for all of the help guys

 

If you've gotta ask.. Take it to have it done.

 

Sure I don't know why you have to hate I asked if any one knows off hand like its not a big deal ill find it myself. And I installed my water pump and alterinator pulley so I'm pretty sure I can get around this this one myself thanks.

 

its always recommended that u torque it down, but u can get by with just drivin it home with an impact gun. just dont overtighten to the point where the bolt will break.

 

Yeah i just used the impact gun everything seems to be pretty good i don't have any problems.... But thanks for the help guys