Scream

iTrader: (1)

Purchased a Kenwood eXcelon KDC-X994 and will be installing it this weekend. Trying to decide on where to install the bluetooth mic and thought I'd look here for suggestions. Pictures would be very helpful!

Thanks!

SquallLHeart

in front of the steering wheel?

davedavetC

iTrader: (4)

i wired mine up through my apillars and then cut a small hole in my headliner right next to my ohsht handles.

Greg S

iTrader: (1)

I've got mine coming out at the overhead map lights.

burstaneurysm

I'll be installing mine tomorrow... I have the clip mounted at the top of the a-pillar close to the windshield. It seems to be a decent spot. We'll see.

pyroman131

I ran mine up in front of the gauge cluster and used adhesive to adhere the plastic mic mount to the plastic trim. So far it's worked out pretty great. Been using my Parrot unit for about 9 months now.

burstaneurysm

Mines installed, I placed it high on the a-pillar against the windshield. All of the reports is that the clarity is excellent. When I had it mounted near the rear view mirror, the clarity was muffled.

Released

mine is by the map lights, best location for low noise

RedDragons

below the radio to the left, just out of sight behind the steering wheel.



never had a problem with anyone hearing me and no permanent mods to the interior

Scream

iTrader: (1)

Since I have a single-DIN unit, I mounted it in the pocket of the dash kit. So far it's working great! I'll try to get pictures tonight.

Released

on the double din install, those plastic spacers are a drag to get to sit right. I finally taped them in place.

RedDragons

ya they are a pain in the ___, i gave up on adjusting them i dont even notice them being off anymore unless im extremely bored

Arielcayago

Please help me install my mic for my pioneer avh4000. I already called c#*+pchfield tech support and they dont know how to remove panels/pillars in my 05 tc. I wana know where i can route my bluetooth mic. Thanks

xB_GA

Mounted the mic. to the steering column. No problems with people hearing me so long as the windows are rolled up. Radio is a Pioneer FH-X700BT.

prairiemystic

I kept the factory (headliner) mic and wiring. It has a preamplifier built-in, so I took that out and connected it into my Kenwood DNX571HD and it works good. Pretty clean.

kirksucks611

Mine came with a Blu Logic setup installed. They put the mic between the display and odo/trip buttons.