so probably after this wave of mods, nothing will be updated for a while...

here's what i got so far... 4500k ddm HID, Injen CAI still to be installed, TRD springs still to be installed, P-Tuning license plate bracket still to be installed. and oem fog lights to be installed.

here's the 4500k compared to a factory Lexus LS430 hid.
http://i4.photobucket.com/albums/y135/redborja202/tc/IMG_0671.jpg

OEM fogs that i painted yellow...
http://i4.photobucket.com/albums/y135/redborja202/tc/IMG_0681.jpg

a$$ shot...
http://i4.photobucket.com/albums/y135/redborja202/tc/IMG_0683.jpg

thanks to wellsley(sp?) scion, something to reduce the amount of people telling me i have a backup light out..
http://i4.photobucket.com/albums/y135/redborja202/tc/IMG_0689.jpg
http://i4.photobucket.com/albums/y135/redborja202/tc/IMG_0685.jpg
http://i4.photobucket.com/albums/y135/redborja202/tc/IMG_0686.jpg
http://i4.photobucket.com/albums/y135/redborja202/tc/IMG_0687.jpg

the fog lights are done... just waiting for the paint to dry on the tail lights.
http://i4.photobucket.com/albums/y135/redborja202/tc/IMG_0690.jpg

as soon as i install everything, there will be a photoshoot... lol...

Get that stuff installed!!! Looks good anyway and look forward to seeing the mods installed.

I typically can't wait to install stuff when it comes in. Usually the UPS or Fedex guy will get to my house right as light is failing. I'll be unrolling drop cords and pulling tools out while my wife sits on the couch and shakes her head.

what did you use to paint the tails/fogs? Im very interested in doing my tails for the same reason.

Looking forward to seeing the install pics!

I typically can't wait to install stuff when it comes in. Usually the UPS or Fedex guy will get to my house right as light is failing. I'll be unrolling drop cords and pulling tools out while my wife sits on the couch and shakes her head.

well, here's the thing. for the springs, im going to do it at work on my day off. so thats not till next monday... for the fogs and the bracket, someone backed into my car already. so im going to take it to the body shop tomorrow to get it fixed. once the new bumper is on, i'll install everything else.

oh, and the intake, it should be on my door step later on, so that WILL be installed today...

@brettalesi I used Krylon stained glass spray paint. they're like $10 each at a michaels crafts store...

It's like you're telling the story of my household!

I typically can't wait to install stuff when it comes in. Usually the UPS or Fedex guy will get to my house right as light is failing. I'll be unrolling drop cords and pulling tools out while my wife sits on the couch and shakes her head.

I'm interested to see how the yellow fogs look on the cement colour!

love the red out in the back. i did the same for my first gen but my driver side reverse is my rear fog light, always stays on. yellow fogs came out good too!

ALRIGHT!!! the intake came in late... so thats gonna have to wait till i install the springs... im gonna do them all together at once...

here's the tail lights installed...
http://i4.photobucket.com/albums/y135/redborja202/tc/IMG_0693.jpg

here's the fog lights installed...
http://i4.photobucket.com/albums/y135/redborja202/tc/IMG_0694.jpg
http://i4.photobucket.com/albums/y135/redborja202/tc/IMG_0695.jpg
http://i4.photobucket.com/albums/y135/redborja202/tc/IMG_0696.jpg
http://i4.photobucket.com/albums/y135/redborja202/tc/IMG_0697.jpg

next week should be a good week... springs will be in, new bumper with no license plate holes on it, license plate bracket and intake will be all installed...

Vardy Nice!

I really like the Cement color....IF I had extra $$ I'd repaint mine Cement!@

looks good so far.... which color intake did you order? cant wait to see pics.... mine should be here tomorrow.

Ya what colour intake? "snjTC" what colour did you get?

@ 1stone - i ordered the black one. i was hoping to see someone else post theirs.

^Interesting. I'm curious to see this piece. I mean polished is easy to imagine, but black I've yet to see. Flat or textured black would be sweet though.

"Cement", post pics of your intake!

since the intake came in late, i only had time for this... so the rest of it will be installed on my next day off...

http://i4.photobucket.com/albums/y135/redborja202/tc/IMG_0698.jpg

it sound SOOOOO good!!!!

Wellesley, LOL

Looking good so far :)

the intake looks good. nice chioce. post a video if you get time. any issues with the install.

soooo.... my car is at the body shop now to get the bumper fixed... bumper is cracked so im getting a new bumper... its gonna be a while... prolly 2 weeks till i get the springs on... :icon_twisted: as of now, im gonna be rolling around in the 05 Lexus LS... eeww... gas prices...

the INJEN for the 2nd Gen actually CARB Approved?

thanks guys!! lol. i miss my damn car already... (its only been a day)

i called the body shop. even though thats all the damage you can see, it needs a new bumper. when they took the bumper off, they saw it cracked about halfway down under the center grill.

ok! car is back... so what's the first thing i do, take it to work and put the TRD springs in!!!

before lowering...
http://i4.photobucket.com/albums/y135/redborja202/tc/IMG_0717.jpg
http://i4.photobucket.com/albums/y135/redborja202/tc/IMG_0718.jpg

difference between stock and TRD springs.
http://i4.photobucket.com/albums/y135/redborja202/tc/IMG_0719.jpg

installed... thanks to a lift and power tools, it only took me an hour to get to this point...
http://i4.photobucket.com/albums/y135/redborja202/tc/IMG_0720.jpg
http://i4.photobucket.com/albums/y135/redborja202/tc/IMG_0721.jpg

and the rears are done!!! (the easiest part of the process...)
http://i4.photobucket.com/albums/y135/redborja202/tc/IMG_0722.jpg

thanks to the salty roads of chicago during snow, check out the rusted exhaust..
http://i4.photobucket.com/albums/y135/redborja202/tc/IMG_0723.jpg

aaaannnnddddd..... done!!!
http://i4.photobucket.com/albums/y135/redborja202/tc/IMG_0724.jpg
http://i4.photobucket.com/albums/y135/redborja202/tc/IMG_0725.jpg
http://i4.photobucket.com/albums/y135/redborja202/tc/IMG_0727.jpg

too bad the body shop drilled into my bumper... so they said when their shop frees up later in april, he's gonna take it back in and fill in the holes...

very nice! after i get my system in, and do my exhaust, these are next on the list. how bad do you think itd be without a lift? i got floor jacks and air tools

it wouldnt be too bad... its just gonna be a little tedious since you're working that low.. power tools will help though... it took me a total of 2 hours since i ended up stripping the bolt on the rear shock... i tightened it soo much with the impact gun... so take it easy on those... and be careful with the spring compressors... they can get tricky...

it wouldnt be too bad... its just gonna be a little tedious since you're working that low.. power tools will help though... it took me a total of 2 hours since i ended up stripping the bolt on the rear shock... i tightened it soo much with the impact gun... so take it easy on those... and be careful with the spring compressors... they can get tricky...


More like, can be a spring loaded gernade lol EXTRA CAREFUL :icon_biggrin:

just found out i get employee pricing on TRD parts so this mod might come sooner than i thought

ok! car is back... so what's the first thing i do, take it to work and put the TRD springs in!!!



Hey, where did you get your springs installed? Just got my tein's (s-tech) in the mail today and can't make up my mind where to go to get then installed.
Reason I'm asking is because I see you have an Illinois plate.

Hey, where did you get your springs installed? Just got my tein's (s-tech) in the mail today and can't make up my mind where to go to get then installed.
Reason I'm asking is because I see you have an Illinois plate.

I did them myself at my work... i work at grossinger toyota in lincolnwood...

im not sure of decent shops that can do it around here... when i come in to work tomorrow, i'll get back with you on a quote from our dealer...

I did them myself at my work... i work at grossinger toyota in lincolnwood...

im not sure of decent shops that can do it around here... when i come in to work tomorrow, i'll get back with you on a quote from our dealer...

Thanks! Shouldn't take more than a couple hours for the install right?

naw. it shouldnt... it took me longer cuz i went ape sh!t with the impact gun on one of the shock bolts on the rear and stripped it... so i had to cut it off and put a new one in...

That sucks..
I've only replaced rear shocks myself on my 325 a while ago
Had a similar problem, but only because of the previous owner had obviously screwed around with the shock mounts, which are a common problem for the model
The last time i replaced springs was back in high school - autos class...don't really feel like doing that again.. lazy :icon_biggrin:

naw. it shouldnt... it took me longer cuz i went ape sh!t with the impact gun on one of the shock bolts on the rear and stripped it... so i had to cut it off and put a new one in...

I did it with a floor jack and four jack-stands. I took my time to clean off all of the rubber isolators for the springs (ArmorAlled) and I installed the TRD front tower brace at the same time. So, I spent 3 to 4 hours doing this. An impact is mandatory because the front strut bolts are torqued to 177-ft-lbs (2,124-in-lbs) and my ½” drive torque wrench only goes up to 150-ft-lbs! Those are 22-mm (3/4-in) hexes.

The only real pain was loosening the inner most bolt of the lower, rear suspension arm…lowering the car on its wheels and then torquing those bolts while the car is on the ground. This bolt is called the “C” bolt in the instructions. The exhaust pipe is in the way of the right one. If this is not done, the rubber bushing will get sheared out with the added 1-inch drop.

Oh, and the drop is exactly 1-inch…front and rear. I measured from the garage floor to the chassis before I started. I drove it for a day and measured it again.

any plans to tint?

any plans to tint?

yup.. 35 all around... thats what i can legally do in Illinois...

http://i1124.photobucket.com/albums/l570/MightyP01/Smileys/bump.gif

We have 4 build threads up top, decided I'd give all the build threads a bump.

Whats up everyone??? i thought id chime in here. i kinda miss the scion forums. well, first off, i dont have the tC anymore.... i know, whomp whomp... i really do miss it sometimes. but after years of driving a coupe, i couldnt say no to the deal i got on my next car. i got it cheap... not to mention its a RARE color combination. now, im rocking a 2006 Lexus GS300 AWD. Glacier frost mica with black interior. here's some pics.

Lowered the car with Megan Racing EZ coil overs. 19" Varrstoen wheels

http://i4.photobucket.com/albums/y135/redborja202/e64cfce4.jpg (http://s4.photobucket.com/user/redborja202/media/e64cfce4.jpg.html)

http://i4.photobucket.com/albums/y135/redborja202/c1e486d2.jpg (http://s4.photobucket.com/user/redborja202/media/c1e486d2.jpg.html)

but i decided to go with something more "VIP" so i decided to let go of the Varrstoen and pick up some Vossen CV-1's. I've actually seen these wheels on a 2tC and it looked GOOD!!!

http://i4.photobucket.com/albums/y135/redborja202/IMG_6673.jpg (http://s4.photobucket.com/user/redborja202/media/IMG_6673.jpg.html)

http://i4.photobucket.com/albums/y135/redborja202/IMG_6678.jpg (http://s4.photobucket.com/user/redborja202/media/IMG_6678.jpg.html)

http://i4.photobucket.com/albums/y135/redborja202/IMG_6680.jpg (http://s4.photobucket.com/user/redborja202/media/IMG_6680.jpg.html)

Coming back to these forums made me miss my tC!!! It could have looked way different from when i had it... kinda makes me wonder what it could have looked like. Everyone's tC's look awesome here!!! Hope you guys like!!!

How did you like the TRD springs? I want to get some on mine

How did you like the TRD springs? I want to get some on mine

I liked the trd springs. they ride really close to stock. maybe a little harder. but i dont think they lower the car enough. the nice thing about the TRD springs though, is that i never had issues about bottoming out or rubbing.

I've got TRD springs and I'm not worried about scrapping or going over bumps. The car looks little bit more aggresive as per comments I've received. A nice little 1.2'' drop IMO.

I'm very happy with them.