Here is an adjustable rear upper control arm for the Gen1 tC that I like the design of...it looks about the same as the Gen2 tC.

http://www.hotchkis.net/scion_tc_spo...ber_links.html (http://www.hotchkis.net/scion_tc_sport_rear_camber_links.html)

Does anybody know what needs to be modified (if anything) on it, to make it fit the Gen2?

Info that I am asking for is:

1. The length of the arm from center-of-hole to center-of-hole.

2. bolt diameter at each end (they look the same)

3. lenght of bushing in the arm (will it fit into the chassis or will I need washers?)

The other thread got off topic and ugly http://www.scionlife.com/forums/showthread.php?t=201423
so pardon the repeat post.

This is not a thread to discuss the validity of adjusting the rear camber as the aforementioned thread digressed to. This is a comparison of the rear upper control arm between the gen1 and gen2 ONLY!

Thanks in advance...

Good thread and questions. I have a buddy with a 1g tC and I'm sure he would let me check the measurements on his rear control arm and I could compare them to mine to see if it will bolt up? I'll keep you posted though :)

Great! This is the best price I could find on them...

http://www.titanmotorsports.com/hotcrecali.html

Lol I sell them myself so I'm all set on my place to buy but if they fit I'll post them on my site and I'll do my best to beat there price :)

If they fit (work)...sign me up for a set.

Same with me!

Me too please!!!

Hotchkis says that their control arm will not work on the Gen2...he said someone has already tried it...