i recently debadged my XB the back looks clean but im looking for suggestions on what or how to plug the 3 holes were the front emblem was, i kno i seen a post on this before and sorry if this is a repost, i also tried the search but came wit a 1,000 plus post and which none were any help, most here use the BB emblem which is cool but i like the clean look w/ no badges so any help would be nice thanks in advance.....

plastic welder

Don't most just replace the front grille instead of removing just the emblem due to what you are experiencing?

Probably and it sucks , i've had the scary happy face for awhile now. I just couldnt stand the ugly scion emblems on my ride

Yes, I too want to fab a fix for the debadged grill. I have a temporary H there, see below, 'POLAR XB' Photo. But I want a better solution. I am looking into ceramic tiles that are white and emblazened with the letter 'X' and another with an 'H' and one with a 'B' and perhaps one with an 'XB'. I want them secured with a plastic tie so I can swap them out as my whim and mood dictate.
http://img267.echo.cx/img267/3328/20050404washwaxbox00103cb.th.jpg (http://img267.echo.cx/my.php?image=20050404washwaxbox00103cb.jpg)
I will post any reasonable solutions that I come across.
Is there anyone who does ceramics as a hobby? I need a tile 1 1/2 inch by 1 7/8 inch.

http://www.scionlife.com/forums/viewtopic.php?t=64508&sid=91cd1ec488434ceb933cfe26cb1cfe4f
check that post