AKgoalie7
04-02-2004, 04:50 AM
I will admit.. I don't know ____ about rims. All i know is the smaller the tire in height, the worse the ride.. With that said...Which of these do you reccomend for the rims and why? (what will give me a good ride and still look great) And what's with the width.. will these fit the xB????
205/40hr17
215/45hr17
235/45hr17
Thank you for your newb patience.
njbox
04-02-2004, 05:25 AM
17"x7" > 205-40-17
17"x7.5"> 215-40-17
AKgoalie7
04-03-2004, 01:24 PM
can anyone vouch for 205/40's ?????
is the ride really that rough... I've heard the TRD's on 215/35 is horrible.. and 40's aren't 'that' much taller...
DJ_X_Trodinaire
04-03-2004, 03:03 PM
can anyone vouch for 205/40's ?????
is the ride really that rough... I've heard the TRD's on 215/35 is horrible.. and 40's aren't 'that' much taller...
theres a handful of them that uses 205 40
richdog is one of them
softrider
04-03-2004, 05:46 PM
Don't think your road conditions are as bad down there as they are here in the tri-state region, but am considering what has been reported as successful in this area:
215/45/17. But would appreciate feedback on whether I should get a 17x7.5 rim, or can I get away with a more available 17x7 rim? Also I'm not considering lowering our box yet.
Also assuming that your road conditions are better that this area , you should consider switching to one of the progressive springs which are recommended in these forums. They will lower your vehicle 1-2 inches, but will result in much improved handling and ride.
CBSIMONSEZ
04-03-2004, 09:59 PM
17"x7" > 205-40-17
17"x7.5"> 215-40-17
:lol: :lol: It looks like all the Dirty Jersey guys are looking into running 215/45s. I can tell you that i have these on my RS1, and really havent had any problems, other then some minor rubbing on the plastic inner fender well when i turn hard. If its pics your looking for, hit the link below. Im gonna wash and re-shoot the car tomorrow, when there isnt such a sun glare. BTW, my ride isnt lowered.
EL_PAALO
04-04-2004, 01:58 AM
Just remember, changing the overall diameter effects gear ratio. Taller will be slower acceleration but lower highway cruising rpm. Smaller is the reverse.
CBSIMONSEZ
04-04-2004, 12:38 PM
Going with the 215/45 vs. the 205/40 is only a 2.3% difference. Not much to worry about IMO.
AKgoalie7
04-04-2004, 01:15 PM
17"x7" > 205-40-17
17"x7.5"> 215-40-17
:lol: :lol: It looks like all the Dirty Jersey guys are looking into running 215/45s. I can tell you that i have these on my RS1, and really havent had any problems, other then some minor rubbing on the plastic inner fender well when i turn hard. If its pics your looking for, hit the link below. Im gonna wash and re-shoot the car tomorrow, when there isnt such a sun glare. BTW, my ride isnt lowered.
nice xB washing machine/dryer.... was that a factory option???? I want one.. :lol:
CBSIMONSEZ
04-04-2004, 02:57 PM
17"x7" > 205-40-17
17"x7.5"> 215-40-17
:lol: :lol: It looks like all the Dirty Jersey guys are looking into running 215/45s. I can tell you that i have these on my RS1, and really havent had any problems, other then some minor rubbing on the plastic inner fender well when i turn hard. If its pics your looking for, hit the link below. Im gonna wash and re-shoot the car tomorrow, when there isnt such a sun glare. BTW, my ride isnt lowered.
nice xB washing machine/dryer.... was that a factory option???? I want one.. :lol:
That was the very limited RS .5, limited to one production, and in part with Maytag. :lol: