The pics suck cuz I used my friends cheapo digi camera. BTW I wanna thank the guys at ScionFX for the help with the install. Those guys are really cool.



http://www.imagestation.com/album/?id=4287146191

The pics suck cuz I used my friends cheapo digi camera. BTW I wanna thank the guys at ScionFX for the help with the install. Those guys are really cool.



http://www.imagestation.com/album/?id=4287146191

Nice totally a new look for the gauges. All you have to do now is get the S7 voltmeter, air fuel and water temp then your set. If only theres a way to change the color of the clock to white huh! BTW what alpine deck do you have and are those CF vinyl overlays?

The pics suck cuz I used my friends cheapo digi camera. BTW I wanna thank the guys at ScionFX for the help with the install. Those guys are really cool.



http://www.imagestation.com/album/?id=4287146191

Nice totally a new look for the gauges. All you have to do now is get the S7 voltmeter, air fuel and water temp then your set. If only theres a way to change the color of the clock to white huh! BTW what alpine deck do you have and are those CF vinyl overlays?


To Change the color of the clock you would have to get in there and change the color of the LED's around the clock...

~WC

wow...looks great...
any pics with them on? night pic?

Here a pic of one.
http://images5.fotki.com/v68/photos/1/198974/862319/DSC04924-vi.jpg

Here a pic of one.
http://images5.fotki.com/v68/photos/1/198974/862319/DSC04924-vi.jpg

what happen to the speedo needle. looks a little limp.


and anybody who installed these notice a problem with the fuel needle backing hitting the RPM 2D Piece. its kinda hard to explain.. but the black piece that holds the needle when the needle goes from the empty tank position to the full tank position, the RPM piece that you stick onto the guage is to close and does not allow it to go back and forth. . . well that was a little issue i ran into, just moved it over a tiny bit, i also still need to run the negative & positive wires.

what happen to the speedo needle. looks a little limp.

i noticed that...below 0 mph huh? :lol:

Here a pic of one.
http://images5.fotki.com/v68/photos/1/198974/862319/DSC04924-vi.jpg

what happen to the speedo needle. looks a little limp.


and anybody who installed these notice a problem with the fuel needle backing hitting the RPM 2D Piece. its kinda hard to explain.. but the black piece that holds the needle when the needle goes from the empty tank position to the full tank position, the RPM piece that you stick onto the guage is to close and does not allow it to go back and forth. . . well that was a little issue i ran into, just moved it over a tiny bit, i also still need to run the negative & positive wires.
I got the car yesterday we were rush to get it to the meet in ontario. it's getting fix today.

how come on every aftermarket gauge installation i've seen, there's always something wrong with the needles?

I have the Alpine CDA-9827 and those are the CF overlays.

Sweet 8) I'll have mine on Monday :D

Is that the same one they sell on this website? If not, where did it come from?

MattB

yes the same one that's on this site.