Ok. So.. I finally put real diamond plate in the back (Thanks for cutting it Gabe!) and bBTed helped me put in 12" Varad LEDs on the far right and left sides. The wires are pretty well hidden now with zip ties. The new diamond plate catches the light much better. Anyway... here are the pics.

http://www.mattguillory.com/my_xB/Varad_Lights_00.JPG
http://www.mattguillory.com/my_xB/Varad_Lights_01.JPG

Peace,
m@

Looks good. So is that 1 under each seat and then 1 to the left and right on the ground? Can you see the neons at night from outside the car with the windows up, like if you were driving by not looking down? I want something really bright.

Looks good. So is that 1 under each seat and then 1 to the left and right on the ground? Can you see the neons at night from outside the car with the windows up, like if you were driving by not looking down? I want something really bright.

Thanks. With the windows rolled up at night, you can detect a subtle ambient light coming from below, but unless you're up against the window looking in, you really can't tell what it is.

Peace,
m@

oper8or,

your ride is coming along straight phat!!! i'm never going to buy the, "...i can't afford it..." from you again. freakin rock stars... :wink:

my girl tripped of the rear view mirror with the disco ball...great touch!!! later!

Na'im

It really looks very impressive and the setup on the flooring is NICE! I'm pretty sure that your thinking of something already! Great Job to Mr. Gabe and Mr. Ted. Sorry could not help out. I got this thing called a new "JOB"! Well you know what I mean.

right on...rmatt looks real nice wit your new diamond plate...
if u need to hook up something else, gimme a call...
we should try to work on the LEDs huh...

--------------------------------------------------------------

congratulation on your new job john!!! bad thing is i cant always meet u at gabe's place...

Looks interesting.....its creative

I saw that on Sunday, and like LV said "It looks like a disco in there..." You know you're doing right then :D seriously thought it did look really good, and if you need LEDs soldered you know you have John, but I've done a good amount of some miniature LEDs for cell phones. Either way, all hands on deck... openDeck? anyway, everyone have a great and safe Thanksgiving.. No driving in a triptosan induced coma :wink:

Glad I could cutt those out for ya m@. If anyone else need thier's cut, give me a call, or PM me. Looking good oper8or!!! :D Its a disco and we need to change your user name to John Travolta :lol:

Looks fantastic. All you need now back there is a bar.

How much power do those things draw? Any issues with the battery?

Looks fantastic. All you need now back there is a bar.

How much power do those things draw? Any issues with the battery?

Matt, the lighting looks great with the flooring!

Thanks folks! More diamond plate and lighting mods to come. :twisted:

Sorry I had to bail so early from D&B :(



Peace,
m@

All you need now back there is a bar.

How much power do those things draw? Any issues with the battery?

No doubt! Too bad I don't drink!!

The cool thing about LEDs is that they draw very little current. There's no problem with the battery. The LEDs I have against the bottom of the door frames are hyper (really bright!) LEDs from a company called Varad. They make some really cool stuff.

I also have some power neon cable from them that I plan on putting in at some point. http://www.varad.com

Check 'em out!

Peace,
m@

looks good but i hope one one steps on them

Matt and I just did the front ones today. Hope he posts some pics soon.

Nice job- clean install

killer, do you just want 50 posts? this is 2 threads you have revived from 2003 man. You will get banned before you get access to the other sections of this site

Killerglass1, you seem to be checking out all the old interior lighting threads. Why dont you check out oznium.com for some great products at awesome prices!

http://www.oznium.com/