Rednecks DSM thread... More fail less doors!
Thread Starter
Senior Member



Fail, INC
SL Member
Joined: May 2005
Posts: 9,975
From: Nice little room with padded walls
Started life as a 98 RS, received a 97 GST (7 bolt ftl) transplant... crankwalked, got built 6 bolt, only on 8lbs currently... needs moar fuel management!

and the must have pic for any DSM owner...
See Crank
See Crank Walk
Walk Crank Walk

and the must have pic for any DSM owner...
See Crank
See Crank Walk
Walk Crank Walk
Thread Starter
Senior Member



Fail, INC
SL Member
Joined: May 2005
Posts: 9,975
From: Nice little room with padded walls
I still have the saturn, but because of all. The problems and setbacks I had putting it together I don't have enough time to get it race ready for the lemons race... so its currently in my back yard under a tarp
Crankwalk is just side to side movement of the crank, on the 7 bolt dsm motors the factory used an odd bearing/crank journal combo and it resulted in a little play in the crank, under boost and at high rpm that play is multiplied and the crank tends to move a lot, normally results in rod knock if it goes transmissin siide or it shuts the motor down if it goes towards the front of the engine, because it hits and destroys a crank sensor
Crankwalk is just side to side movement of the crank, on the 7 bolt dsm motors the factory used an odd bearing/crank journal combo and it resulted in a little play in the crank, under boost and at high rpm that play is multiplied and the crank tends to move a lot, normally results in rod knock if it goes transmissin siide or it shuts the motor down if it goes towards the front of the engine, because it hits and destroys a crank sensor
Thread
Thread Starter
Forum
Replies
Last Post
atlantaemail
Scion xA Owners Lounge
3
Sep 20, 2015 02:03 AM





