Notices
Autosports & Technique
General driving and racing...

My Scion xD vs. New generation Si and last gen Si

Thread Tools
 
Search this Thread
 
Old Mar 17, 2008 | 01:48 PM
  #1  
blown_xa's Avatar
Thread Starter
Senior Member
10 Year Member
5 Year Member
SL Member
 
Joined: Jul 2005
Posts: 1,902
From: PTuning
Default My Scion xD vs. New generation Si and last gen Si

Just like to say first and foremost, this was not on the street, it was on the strip. I conclude that the Scion xD is probably one of the most underated cars this year as far as hp and acceleration. My xD is completely stock other than lowering springs.
I dont have a scanner so i can't scan my slips, but I will tell u that the xD is a high 15 second car if u show up with a low gas load and u can drive. I will be posting videos in the next couple of days (in car shots).
At the dragstrip there must have been a Civic Si club or meet because there was over a dozen of them there. I ended up racing 2 and beat them both, one was the last generation sI (170 hp) and the other one was the new one (195hp) I dont know what mods they had but im guessing minor if any. Odviously the new gen Si wasnt the perfect driver because it should have beat me but I can tell u he launched fine and didnt miss any gears( u will see the video) . And to tell u the truth, last summer i took a completly stock tC from the dealership and ran slower than I did in the xD... I'm not a perfect driver but I consider myself pretty good.
Old Mar 19, 2008 | 04:38 AM
  #2  
dexter_5000's Avatar
Senior Member
10 Year Member
5 Year Member
SL Member
 
Joined: Sep 2005
Posts: 973
From: New Hampshire
Default

videos?
Old Mar 19, 2008 | 10:02 PM
  #3  
mrexotica's Avatar
Senior Member
10 Year Member
5 Year Member
SL Member
 
Joined: Mar 2007
Posts: 774
Default

you gonna make a track car out of your xD?
Old Mar 19, 2008 | 10:44 PM
  #4  
blown_xa's Avatar
Thread Starter
Senior Member
10 Year Member
5 Year Member
SL Member
 
Joined: Jul 2005
Posts: 1,902
From: PTuning
Default

ill get viseos posted asap, sorry i was in NY for Haku reveal
Old Mar 24, 2008 | 12:03 AM
  #5  
rhythmnsmoke's Avatar
Senior Member
10 Year Member
5 Year Member
Music City Scions
Scikotics
SL Member
 
Joined: Jun 2005
Posts: 16,747
From: TN
Default

You can't dump the clutch in a tC, so if you ran slower in the tC, you must not have modulated the throttle good enough off the line. It's a bit rough to put down the tQ the tC makes with only one wheel spinning.

High 15's in the xD though, I would not have expected. Good runs man. Waiting on the vids and slips.
Old Mar 24, 2008 | 04:50 PM
  #6  
blown_xa's Avatar
Thread Starter
Senior Member
10 Year Member
5 Year Member
SL Member
 
Joined: Jul 2005
Posts: 1,902
From: PTuning
Default

sorry guys, don't worry ill get the vids up soon. been busy, plus the fact it took me like an hour last time trying to figure out how to do it... lol
Old Mar 27, 2008 | 08:31 PM
  #7  
Whocares05050's Avatar
Senior Member
10 Year Member
5 Year Member
Scikotics
SL Member
 
Joined: Oct 2004
Posts: 3,689
From: Florida
Default

It was driver error then. your not beating me. I run consistant 14.8 in my stock si. Not eveyone can drive, lol. You beat the driver, not the car, IMHO.

Waiting for video and slips.
Old Mar 31, 2008 | 12:27 AM
  #8  
Danger_Darren's Avatar
Senior Member
10 Year Member
5 Year Member
SL Member
 
Joined: Aug 2006
Posts: 238
From: SoCal
Default

It just shows how a good driver can outrun a bad driver even if he is in a faster car.

i cant wait to see the video.
Old Apr 3, 2008 | 12:18 AM
  #9  
Sciond's Avatar
Senior Member
10 Year Member

5 Year Member
Fail, INC
Club One

SL Member
 
Joined: Nov 2004
Posts: 14,929
From: What's in your Box...
Default

video???
Old Apr 3, 2008 | 12:41 AM
  #10  
blown_xa's Avatar
Thread Starter
Senior Member
10 Year Member
5 Year Member
SL Member
 
Joined: Jul 2005
Posts: 1,902
From: PTuning
Default

ill get the videos up. Kinda been busy with new job. Also went through motor # 3 on my xA.
Old Apr 3, 2008 | 12:45 AM
  #11  
Sciond's Avatar
Senior Member
10 Year Member

5 Year Member
Fail, INC
Club One

SL Member
 
Joined: Nov 2004
Posts: 14,929
From: What's in your Box...
Default

OUCH!!!!
Old Apr 3, 2008 | 12:51 AM
  #12  
draxcaliber's Avatar
Senior Member
10 Year Member
5 Year Member
SL Member
 
Joined: Sep 2006
Posts: 11,141
From: Maryland
Default

Originally Posted by blown_xa
ill get the videos up. Kinda been busy with new job. Also went through motor # 3 on my xA.
motor number 3? really? do you only use stock xa engines, have you considered having one built to take the punishment since you now have a three-peat on your hands?
Old Apr 3, 2008 | 12:59 AM
  #13  
greybox's Avatar
Senior Member
10 Year Member
5 Year Member
SL Member
 
Joined: Jun 2007
Posts: 1,300
From: Lake Oswego, OR
Default

So how does the xD handle (corners/breaking) in comparison to an xA/xB with the same set-up would you guess? I have heard the xD feels sluggish and heavier but then again you seem to have an actual handle on this instead of a half hearted guess.
Old Apr 5, 2008 | 11:18 AM
  #14  
Whocares05050's Avatar
Senior Member
10 Year Member
5 Year Member
Scikotics
SL Member
 
Joined: Oct 2004
Posts: 3,689
From: Florida
Default

Weres the vids, slips, update?
Old Apr 7, 2008 | 04:29 PM
  #15  
Tamago's Avatar
Banned
SL Member
 
Joined: Mar 2004
Posts: 2,106
Default

cheaper to buy engines than build them
Old Apr 7, 2008 | 09:03 PM
  #16  
Tamago's Avatar
Banned
SL Member
 
Joined: Mar 2004
Posts: 2,106
Default

Originally Posted by greybox
So how does the xD handle (corners/breaking) in comparison to an xA/xB with the same set-up would you guess? I have heard the xD feels sluggish and heavier but then again you seem to have an actual handle on this instead of a half hearted guess.
by the math.. the xD will always be trumped by the xA.. ;)
Old Apr 7, 2008 | 09:16 PM
  #17  
draxcaliber's Avatar
Senior Member
10 Year Member
5 Year Member
SL Member
 
Joined: Sep 2006
Posts: 11,141
From: Maryland
Default

Originally Posted by Tamago
cheaper to buy engines than build them
in the short run, yeah, definetly, but in the long run...i mean how many stock engines do you have to go through before it becomes more cost effective to just build an engine?
Old Apr 7, 2008 | 09:17 PM
  #18  
Tamago's Avatar
Banned
SL Member
 
Joined: Mar 2004
Posts: 2,106
Default

10-12
Old Apr 7, 2008 | 09:35 PM
  #19  
Ace83's Avatar
Senior Member
10 Year Member
5 Year Member
Ronin Scion
SL Member
Premium Member
iTrader: (6)
 
Joined: Aug 2006
Posts: 11,117
From: TX
Default

Originally Posted by Tamago
10-12
haha but mounting and unmounting 10-12 lol i'd build just build it..

bump for vids, didnt know xd can be pretty decent stock.. for sure the new gen si driver isnt good but low 15s on xd can still beat quite a few new si drivers espcially noobs
Old Apr 7, 2008 | 09:39 PM
  #20  
Tamago's Avatar
Banned
SL Member
 
Joined: Mar 2004
Posts: 2,106
Default

Originally Posted by Ace83
Originally Posted by Tamago
10-12
haha but mounting and unmounting 10-12 lol i'd build just build it..

bump for vids, didnt know xd can be pretty decent stock.. for sure the new gen si driver isnt good but low 15s on xd can still beat quite a few new si drivers espcially noobs
you can pull the stock engine in under 2 hours.. not a big deal..

plus there are no viable high performance 1nz engine parts..



All times are GMT. The time now is 07:39 AM.