KEYTECHNIQUES

iTrader: (1)

Keyhole covers by KeyTechniques


Please visit us @ http://keytechniques.net/Scion-Main-page.html
We have wiper plugs and bumper plugs as well

Fit and Finish

Don't be fooled by the claims of the other covers. Keytechniques keyhole covers are not plugs and the paint match is exact because we use the newer Chroma based paint and German clear coat which is UV resistant. Other paints don't match up and if you observe closely at the others you will see dispersion of the flakes and distortions in the finish and that's why we perfected the process working together with our paint supplier who is an expert in the field of paint finish. The purpose of the keyhole cover is to hide the keyhole and if the paint shade or flake is off slightly it will stand out so choose wisely and be satisfied. Bottom line is you get what you pay for from the quality of service to the packaging. There are no hidden charges or extra insurance you have to purchase as its my responsibility that you are satisfied or a refund or replacement within 15 days of your purchase.

xB keyhole covers

tC, xA and xB2 keyhole covers


Each cover will be modified to fit and will be individually tested before they are painted to OEM colors and shipped out.

Ordering
Attention as of September 8th 2010 we have made ordering very easy.

Please visit our website.

http://keytechniques.net/Scion-Main-page.html





Instructions on using your Keyhole covers
Warning
* Your keyhole covers are not colored plastic they are painted so please treat them with care and don't manhandle them

Mounting:
The covers consist of two parts.
1. Cover
2. Stem

tC type covers:


The stem on the tC cover comes with a thin coat of contact cement to roughen up the stem and add tension to it. Observe the diagram closely to figure out the orientation of the eccentric stem to the door lock and insert the cover by stabbing it downwards and pushing the stem into the keyhole, then move it around until it is flush as can be. You will notice that the cover goes only one way due to the eccentric stem. If it does not go in on the first try changing the angle until it goes in but don't be rough with it. Remember that you will not get it to be absolutely flush due to the irregular thickness around the hole but you will find that it comes within acceptable range.



xB covers:

Not much work here but you can insert the cover as is first to check that it goes all the way in. If it doesn’t sit flush then turn it 180 degrees and reinsert the cover the right way It will sit relatively flush and look good but if you are very picky and look down from the very top with your face pressed against the door you may find an ever so small micro gap on one if the adjoining edges and I would not worry about it as it should not be visible as no one can see it.

Additional step for both covers:
Both covers should fit relatively snug but it is best to remove the cover after you have them seated well and add a small bead of contact cement on the stem, Wait 10 minutes then insert them into place. The contact cement only touches the hinged door in one small area on the out side of the lock and the rest is floating on the inside and touches nothing. This will insure that no one can easily remove the cover or any chance of it falling out. I recommend this step to ensure your satisfaction. Contact Cement is a low tension adhesive which is water resistant available at any automotive or hardware store for under $2.00. Please only use this adhesive and not a stronger one.

Removal:

You will need to first push the cover down and insert your driver’s license or credit car through the gap and fish it out. the adhesive point on the lock hinge stretches and the cover is free to come out.

Reinsertion:
Take a Q-tip doused in Alcohol and clean the adhesion point on the out side of the lock hinge which dissolves easily and replete the procedure.

The adhesion method is non destructive and can be cleaned up easy with any solvent.


*Your covers use some of the best materials for manufacture including a UV resistant clear coat which is special ordered from Germany.
Treat your covers well and it will give you many years of good service


Personal note: I am a car enthusiast just like you and trusted on many forums for my efforts and services. Please PM me if you have any complaints or problems and I will try to respond ASAP to help solve your problem.

KEYTECHNIQUES

iTrader: (1)

If you don't find the color that you need please check the list below as I have a variety of Toyota colors.

rs2.0 (8Q1) BlitzBlue Mica

http://i216.photobucket.com/albums/c...zBlueMica1.jpg

http://i216.photobucket.com/albums/c...zBlueMica2.jpg
Salsa red Pearl

http://i216.photobucket.com/albums/c...aRedPearl1.jpg
Indigo Inc Pearl

http://i216.photobucket.com/albums/c...trixindigo.jpg

Silver Streak Mica 1E7

http://i216.photobucket.com/albums/c...StreakMica.jpg

http://i216.photobucket.com/albums/c...treakMica2.jpg
Polar White (06

http://i216.photobucket.com/albums/cc215/dev_r6/068.jpg

http://i216.photobucket.com/albums/c...ev_r6/0682.jpg
RS 2.0 (576)

http://i216.photobucket.com/albums/cc215/dev_r6/576.jpg
Black Sand Pearl (209)

http://i216.photobucket.com/albums/c...ev_r6/BSP2.jpg
RS 3.0 (6U1)

http://i216.photobucket.com/albums/c...v_r6/rs32b.jpg
rs4.0 (3R2)

http://i216.photobucket.com/albums/c...to0025_002.jpg

shadow mica (1F4)

http://i216.photobucket.com/albums/c...ShadowMica.jpg

puddlestc

will you be getting paint code 08s7 for the waveline pearl tC?

KEYTECHNIQUES

iTrader: (1)

Only if I can get three people that would like to order in that color.

puddlestc

two more people for waveline pearl please!!!!!

WAlterEgo

iTrader: (1)

a) 2
b) BSP 209
c) tC
payment sent.

xdejablu3x

s*** im down!...a pair of FM (1E0) for the TC for 76018 please!

KEYTECHNIQUES

iTrader: (1)

Just a small reminder. I am making a new batch this Wednesday so please place your orders today to get them soon.

Thanks and enjoy the sale.

Dev

cz3ch

qty: 1 xb2008 wiper plug
sl name; cz3ch
colorcode: BSP - 209
email/paypal: jelinek@gmail.com

rvpps2rocks

ummmi have a question idk if u wanna pm about it..i want 2 tc covers but can you paint it nissan LeMans Sunset..Paint code under Nissan is A17

hawgs74

cool...

KEYTECHNIQUES

iTrader: (1)

I dont have that color but if you like I can send you preped covers that you can paint if you are interested.

Thanks
dev

rvpps2rocks

would that be a litte cheaper since its not painted?.ill ask the bodyshop that painted my car to paint it. idk how much theyll charge

xjamiex

a) 2
b) BSP 209
c) tC

for 98042
pm me

hawgs74

a) 2
b) BSP - 209
c) tc

72016

KEYTECHNIQUES

iTrader: (1)

It would be the same price. Reason being that most of the labor is in the preperation.

Thanks
dev

rvpps2rocks

eh either way...im still gunna re-prep them..but thats just a personal thing. not that i dont trust you its me.

KEYTECHNIQUES

iTrader: (1)

Its up to you but the price remains the same unless you want to do all of the sanding.

Thanks
dev

rvpps2rocks

how much unpreped then..il probably just take it preped cuz its only 15 bucks but just curious

KEYTECHNIQUES

iTrader: (1)

I can do $10 but there is much work to be done in terms of sanding and preperation.