FS: Built Head SOLD!!!!
Sellin my built head, perfect condition! Its got Brian Crower Valve springs & Retainers, Ferrea Valves, Polished Cams, perfect clearances!
ready to drop in and rev your motor to 8k instantly!! Just had it taken to the machine shop and had them look it over and its good to go they said its perfect and rechecked the clearances!
asking 1700 + shipping.. this is practically the same thing other shops offer but for hella less!
Also considering trades of somesort... exterior wise or headunits or sound systems + cash
ready to drop in and rev your motor to 8k instantly!! Just had it taken to the machine shop and had them look it over and its good to go they said its perfect and rechecked the clearances!
asking 1700 + shipping.. this is practically the same thing other shops offer but for hella less!
Also considering trades of somesort... exterior wise or headunits or sound systems + cash
Last edited by SoFloTC; Jan 17, 2010 at 06:37 PM.
OK, just to update for every one ******
This head was brought to machine shop by be. Head was decked to a mirror finish, Valves were checked. vacume tested. Buckets were reclearanced. Cams were polished. Springs were all checked. Head was bead blasted and cleaned.
This things is ready to drop in. Has been proven to goto 8k rpms and hold power!
Brian Crower Springs and retainers
Ferrea Valves
New valve guides.
This head was brought to machine shop by be. Head was decked to a mirror finish, Valves were checked. vacume tested. Buckets were reclearanced. Cams were polished. Springs were all checked. Head was bead blasted and cleaned.
This things is ready to drop in. Has been proven to goto 8k rpms and hold power!
Brian Crower Springs and retainers
Ferrea Valves
New valve guides.
just a question for soflotc . i also have bc stage 2 cams and valve springs set up, with a full post and polish , does that mean i could raise my rev to 7500rpm? but i didnt change valves..
i woulda gotten valves.. nobody has pushed the limits of stockers to see but i couldnt tell ya






