SOLD!!!
05-20-2010, 11:56 PM
#1
SOLD!!!
Alright was slowly working through these to the locals but gotta open it up to all now.
Genuine Sparco harness bars made by Speedware Motorsports in Redmond, WA. This style was discontinued in favor of a "pinned" style that allows for ease of removal. A couple of friends and I got wind of the closeout and gobbled them up. However I have had them for awhile now and would like the space back so I am willing to ship now.
***Take notice they are scuffed up already, and I would recommend painting them before installing them****
***These bars are incomplete as hardware and "down tubes" are needed to complete this safety device, in other words NOT SAFE TO USE JUST THE BAR WITH OUT THE HARDWARE***
Bars are 49-1/2" across for the 4 on the left and 50" across for the one on the right and the one on bottom.
All 3 sets of down tubes are 24" long. Custom/ vehicle specific tubes can be ordered from Speedware motorsports
With that being said here they are:
Down tubes:
Price is:
$110 shipped per bar to the lower 48
**WAS $75 SHIPPED/$60 LOCAL**
**NOW $65 SHIPPED/$50 LOCAL OBO**
TRADES WELCOME!!
$40 shipped per pair of down tubes the to lower 48
**SOLD OUT!!**
$130 shipped for 1 bar & pair of down tubes to the lower 48!!!
**NO MORE DOWN TUBES!!**
**Please also note that because of the size and weight shipping is going to suck and it will be difficult to pack so please be not that I will do my best to prevent any further chipping/scratches on the paint of the bars.
Genuine Sparco harness bars made by Speedware Motorsports in Redmond, WA. This style was discontinued in favor of a "pinned" style that allows for ease of removal. A couple of friends and I got wind of the closeout and gobbled them up. However I have had them for awhile now and would like the space back so I am willing to ship now.
***Take notice they are scuffed up already, and I would recommend painting them before installing them****
***These bars are incomplete as hardware and "down tubes" are needed to complete this safety device, in other words NOT SAFE TO USE JUST THE BAR WITH OUT THE HARDWARE***
Bars are 49-1/2" across for the 4 on the left and 50" across for the one on the right and the one on bottom.
All 3 sets of down tubes are 24" long. Custom/ vehicle specific tubes can be ordered from Speedware motorsports
With that being said here they are:
Down tubes:
Price is:
$110 shipped per bar to the lower 48
**WAS $75 SHIPPED/$60 LOCAL**
**NOW $65 SHIPPED/$50 LOCAL OBO**
TRADES WELCOME!!
$40 shipped per pair of down tubes the to lower 48
**SOLD OUT!!**
$130 shipped for 1 bar & pair of down tubes to the lower 48!!!
**NO MORE DOWN TUBES!!**
**Please also note that because of the size and weight shipping is going to suck and it will be difficult to pack so please be not that I will do my best to prevent any further chipping/scratches on the paint of the bars.
Last edited by Kanchi; 06-13-2010 at 03:36 AM. Reason: New pricing!
05-21-2010, 02:54 AM
#2
To answer some questions that have been asked what you will need to have a functional safety device out of this in your car you will need:
-4x eye/swivel bolts avalaible from Speedware Mototsports for $6.50 ea
-2x nut/bolt/flat & lock washer combo to secure down tubes to the bar
-2x bolts to secure down tubes where seatbelt bolts to car near the floor (potentially)
-2x down tubes ~27" needed for tC avalaible from Speedware Mototsports for $100/pair (might be able to use the 24" tubes w/ longer eye/swivel bolt shanks)
For a grand total of about $170 w/ the 24" tubes from me or/ ~$250 w/ the tubes ordered from speedware. Either way a great deal considering they start @ $330 from Sparco:
http://www.sparcousa.com/harness_bars.asp
Hope this helps!
-4x eye/swivel bolts avalaible from Speedware Mototsports for $6.50 ea
-2x nut/bolt/flat & lock washer combo to secure down tubes to the bar
-2x bolts to secure down tubes where seatbelt bolts to car near the floor (potentially)
-2x down tubes ~27" needed for tC avalaible from Speedware Mototsports for $100/pair (might be able to use the 24" tubes w/ longer eye/swivel bolt shanks)
For a grand total of about $170 w/ the 24" tubes from me or/ ~$250 w/ the tubes ordered from speedware. Either way a great deal considering they start @ $330 from Sparco:
http://www.sparcousa.com/harness_bars.asp
Hope this helps!
Last edited by Kanchi; 05-24-2010 at 02:08 AM.
05-26-2010, 09:33 AM
#9
Senior Member
SL Member
Join Date: Oct 2008
Location: Seattle...I miss Boston
Posts: 513
Dear Erik,
I've been drinking, but I'm pretty sure I need the support spars, aka. the "downtubes". Tell me how much it is to my cellular telephone and I shall provide you the needed funds.
(it took me almost eight minutes to type this message without error...that seems medal worthy to me in this current state.)
Love,
One-Nut_McGee
I've been drinking, but I'm pretty sure I need the support spars, aka. the "downtubes". Tell me how much it is to my cellular telephone and I shall provide you the needed funds.
(it took me almost eight minutes to type this message without error...that seems medal worthy to me in this current state.)
Love,
One-Nut_McGee
05-26-2010, 09:34 AM
#10
Senior Member
SL Member
Join Date: Oct 2008
Location: Seattle...I miss Boston
Posts: 513
Oh...and "bump"
Thread
Thread Starter
Forum
Replies
Last Post
rain7905643
PPC: Engine / Drivetrain
3
06-13-2018 05:29 AM