FS TC: SPC 2° CONTROL ARM
This is what I have from when I took off my coilovers today. The link is below to the website. Used for lowered cars. Only used for 10k miles. 120 shipped OBO.
http://www.spcperformance.com/PROD_D...d2=67485&cmd3= This fixed change arm is ideal for correcting excessive negative camber issues seen in lowered Scion tC's. The Scion tC comes from the factory with a cam bolt that provides +/- 1.25 deg. This factory change is not enough for lowered vehicles. By increasing the length of the rear upper control arm SPC Performance adds 2 deg. positive camber to the rear suspension that can then be dialed in with the OEM cam bolt. Rear Adjustment range: (Includes the camber adjustment built-in from the factory) Camber -3.25 degree to +3.25 degree Installation time: .5 hr/side Required: 1 per wheel Applications Scion: 2005 & Up tC I believe SPC sells them for 99.95 an arm. |
um... the stock camber adjustments can do A LOT more then +/- 1.25 degrees i was able to bring my -3 camber to -.5 and back to -2.5
|
The statement after the website address is from the website. I know nothing about camber or whatever.
|
Bump
|
bump
|
wait so this thing adds camber? it looks like a fixed arm so it's not adjustable...
|
"By increasing the length of the rear upper control arm SPC Performance adds 2 deg. positive camber to the rear suspension that can then be dialed in with the OEM cam bolt."
|
shat... i need some less camber.. bump for you
|
still for sale.
|
bump
|
still for sale.
|
i have these and were great bringing my camber back up to spec!
|
bump
|
Still for sale
|
still for sale.
|
Bump
|
still for sale bump
|
bump
|
still available bro? pm me if so.
|
still for sale or trade for low mile h-tech or trd springs.
|
All times are GMT. The time now is 07:49 PM. |
© 2024 MH Sub I, LLC dba Internet Brands