GI/FS: SSR Professor SP1 17x8 +37/24 5x100
Thread Starter
Joined: May 2008
Posts: 6,458
From: CYN
In preparation for putting the car back to a stockish form, I have to sell my wheels. I do not want to, but I would rather not have any flashy mods. I am also selling my exhaust and taillights and removing my stickers 
. SOOOO on to the wheels:
The wheels are in OK condition. I am the third owner of them. All four wheels have some curb rash on them. One has a paint chip on the face. Some more than others. I wanted to refinish them, but never did. I would assume it would cost between 50-100 per wheel to get redone (price reflects this). There are NO bends and NO cracks. To think of it, I don't think I did any of the current rash (yay for sloppy thirds!).
These wheels have two different offsets. The fronts are +37 and the rears are +24. I have to use -2 degrees of camber in the rear on stock, untouched fenders and -1 degree in the front with my fender liner in. These wheels will give you an aggressive look (if you go low). They are also 3-piece wheels which will make them easier to modify.
On to photos:
Wheel 1:




Wheel 2:





Wheel 3:





Wheel 4:




On the car:



DO NOT come in here and debate my price or threadjack (you may PM me about offers) DO NOT argue in my thread. I AM NOT in a hurry to sell so lowballers will be ignored.
Price: 900 local pick up (Charlotte, NC 28269) OBO (lowballers will be ignored). I WILL ship, but buyer pays all shipping fees.
Whats included: 4 wheels
2 sets of lugs (one set of red short rays and one set of silver gorillas - both have keys).
NO TIRES
Any questions do not hesitate to pm me!
The wheels are in OK condition. I am the third owner of them. All four wheels have some curb rash on them. One has a paint chip on the face. Some more than others. I wanted to refinish them, but never did. I would assume it would cost between 50-100 per wheel to get redone (price reflects this). There are NO bends and NO cracks. To think of it, I don't think I did any of the current rash (yay for sloppy thirds!).
These wheels have two different offsets. The fronts are +37 and the rears are +24. I have to use -2 degrees of camber in the rear on stock, untouched fenders and -1 degree in the front with my fender liner in. These wheels will give you an aggressive look (if you go low). They are also 3-piece wheels which will make them easier to modify.
On to photos:
Wheel 1:




Wheel 2:





Wheel 3:





Wheel 4:




On the car:



DO NOT come in here and debate my price or threadjack (you may PM me about offers) DO NOT argue in my thread. I AM NOT in a hurry to sell so lowballers will be ignored.
Price: 900 local pick up (Charlotte, NC 28269) OBO (lowballers will be ignored). I WILL ship, but buyer pays all shipping fees.
Whats included: 4 wheels
2 sets of lugs (one set of red short rays and one set of silver gorillas - both have keys).
NO TIRES
Any questions do not hesitate to pm me!
Last edited by RusWolf; Jun 15, 2010 at 10:07 AM.
Thread Starter
Joined: May 2008
Posts: 6,458
From: CYN
part of me says i don't have to, but i am selling them regardless when i move back to nyc and the car goes back to stock. i figure, if i do it now, I'll have more time to cope with the pain haha.
Just so you know, your car will no longer be my 2nd favorite tC if you do not put them back on...
LOL. No but really. I mean that. When I first joined SL, you're car was where I wanted mine to be. Perfect stace, perfect wheels.
No hurry, but if you can shoot me the possible shipping dimensions I can quote shipping. I'm still kind of interested in these.
GLWS!
LOL. No but really. I mean that. When I first joined SL, you're car was where I wanted mine to be. Perfect stace, perfect wheels.
No hurry, but if you can shoot me the possible shipping dimensions I can quote shipping. I'm still kind of interested in these.
GLWS!
Thread
Thread Starter
Forum
Replies
Last Post
rvascion
Scion xB 2nd-Gen Wheel & Tire
6
Aug 16, 2015 02:26 AM
sarcasmkillsme
Scion xA/xB 1st-Gen Wheel & Tire
4
Dec 20, 2005 05:02 PM
JJJR
Scion xA/xB 1st-Gen Wheel & Tire
29
Jun 7, 2005 11:31 PM
onlineshowoffcom
Scion xA/xB 1st-Gen Wheel & Tire
50
Jan 22, 2004 01:40 AM





pm replied



