SOLD! CA: 5x100 18x10 Work VS-XX Extreme Gold wrapped in 225/35/18 federal 595
#1
Senior Member
Scikotics
SL Member
Thread Starter
iTrader: (2)
Join Date: Aug 2006
Location: Millbrae, CA
Posts: 1,253
SOLD! CA: 5x100 18x10 Work VS-XX Extreme Gold wrapped in 225/35/18 federal 595
I will post these wheels for sale as well.
When I first got them
on my car
and pix I took today
I special ordered these wheels thru ravspec in April 09 and received them 4months later in August 09. I paid $2650 for these wheels to get in size/bolt pattern I wanted. There are not too many of vs-xx's in similar spec in 5x100 as far as I know (of course there are more out there now than back in 09. haha).
18x10 +38 (a-disk) with 3" lip front and +33 (o-disk) with 3.5" lip rear.
I ran 15mm spacers in front and 10mm in rear for a fitment I liked, I will include 4 x 10mm ichiba hub centric spacers (no studs since they are still on my car, studs cost like $3 each from ichiba) for free if buyer wants them. (sorry don't have 15mm anymore)
Wheels are in excellent conditions, I've always took extra care on them and stored them in my garage in winter and whenever I didn't necessarily need them on my car(these were mainly for car show purpose and I always had extra wheels to put on) however, there are a few nicks and light scratches on lips from normal driving and a some chips around the center cap area but there are no curb damages (I always park at least 1ft. from the curb )
Wheels are wrapped in 225/35/18 federal ss595. Wheels and tires have about 5k miles on them but as you can see in the pictures tires still look pretty new except some camber/toe wear inside but still have tons of life on them.
I'm not going to split wheels and tires since the these tires are not worth selling alone plus I don't want to risk damaging the lips while dismounting tires.
I'd like to get $2000cash if picked up local (bay area 94030, CA) or $2200 shipped to lower 48 states (add 3% paypal fee). I prefer local sale since they are big and heavy to ship but yes, I will ship.
Wheels will come with 4 x 10mm Ichiba spacers (54.1mm hub for tC) and hubcentric rings (for tc as well)
Sorry, NO TRADES because I’m parting out my car.
I'm pretty firm on the price but we will see how it goes, I'm not in hurry to sell these
PM me if you have any questions.
SOLD!!!
When I first got them
on my car
and pix I took today
I special ordered these wheels thru ravspec in April 09 and received them 4months later in August 09. I paid $2650 for these wheels to get in size/bolt pattern I wanted. There are not too many of vs-xx's in similar spec in 5x100 as far as I know (of course there are more out there now than back in 09. haha).
18x10 +38 (a-disk) with 3" lip front and +33 (o-disk) with 3.5" lip rear.
I ran 15mm spacers in front and 10mm in rear for a fitment I liked, I will include 4 x 10mm ichiba hub centric spacers (no studs since they are still on my car, studs cost like $3 each from ichiba) for free if buyer wants them. (sorry don't have 15mm anymore)
Wheels are in excellent conditions, I've always took extra care on them and stored them in my garage in winter and whenever I didn't necessarily need them on my car(these were mainly for car show purpose and I always had extra wheels to put on) however, there are a few nicks and light scratches on lips from normal driving and a some chips around the center cap area but there are no curb damages (I always park at least 1ft. from the curb )
Wheels are wrapped in 225/35/18 federal ss595. Wheels and tires have about 5k miles on them but as you can see in the pictures tires still look pretty new except some camber/toe wear inside but still have tons of life on them.
I'm not going to split wheels and tires since the these tires are not worth selling alone plus I don't want to risk damaging the lips while dismounting tires.
I'd like to get $2000cash if picked up local (bay area 94030, CA) or $2200 shipped to lower 48 states (add 3% paypal fee). I prefer local sale since they are big and heavy to ship but yes, I will ship.
Wheels will come with 4 x 10mm Ichiba spacers (54.1mm hub for tC) and hubcentric rings (for tc as well)
Sorry, NO TRADES because I’m parting out my car.
I'm pretty firm on the price but we will see how it goes, I'm not in hurry to sell these
PM me if you have any questions.
SOLD!!!
Last edited by riboflavin; 02-27-2011 at 06:34 PM.
#4
I saw your car on stance nation, it said your rims were +23 all around was that a typo? Just wondering cause I ordered 18x10 rims with +24 all around and based my selection off your rims. Thanks
#7
Senior Member
Scikotics
SL Member
Thread Starter
iTrader: (2)
Join Date: Aug 2006
Location: Millbrae, CA
Posts: 1,253
Yup, I ran 15mm front and 10mm rear to make +23 all around.
I know I should've ordered +21 offset in the beginning but I realized it 2weeks after I placed an order. haha
As for parting-out, I will make a thread sometime next week. I'm getting many interest on my parts especially bbk, brides, and lights but please wait until u see my post
I know I should've ordered +21 offset in the beginning but I realized it 2weeks after I placed an order. haha
As for parting-out, I will make a thread sometime next week. I'm getting many interest on my parts especially bbk, brides, and lights but please wait until u see my post
#9
Oh that makes sense so were you happy with the +23 all around? I'm really curious to see how my +24's work out, I ordered ssr sp1's
#10
Senior Member
Scikotics
SL Member
Thread Starter
iTrader: (2)
Join Date: Aug 2006
Location: Millbrae, CA
Posts: 1,253
You can run whatever width/offset you like by modding ur fenders alot but when the time comes to sell/part with your car(which is what I'm doing now), you will regret what you've done to it. haha
#14
Senior Member
Scikotics
SL Member
Thread Starter
iTrader: (2)
Join Date: Aug 2006
Location: Millbrae, CA
Posts: 1,253
I'm done with my tC and will be trading it in in the summer (sooner if possible) for something more practical and comfortable (but faster!!! LOL). My GS350 serves me as DD and I've only put less than 2000 miles on my tc since January of last year so there's no need for me to keep it.
I'm sad to part with my car but it's time to move on.
#15
10 +23 is just perfect without destroying our stock fenders. I honestly don't like having messed up fenders from pulling too much and/or rubbing tires.
You can run whatever width/offset you like by modding ur fenders alot but when the time comes to sell/part with your car(which is what I'm doing now), you will regret what you've done to it. haha
#17
i put the amount you told me minus 50 away, if it comes down to it i can swing the other 50, i just really want these.
anyways
bump for the wheels! sick sizing and wheels
#20
Hey Will, Haven't talked to u for a while. hehe
I'm done with my tC and will be trading it in in the summer (sooner if possible) for something more practical and comfortable (but faster!!! LOL). My GS350 serves me as DD and I've only put less than 2000 miles on my tc since January of last year so there's no need for me to keep it.
I'm sad to part with my car but it's time to move on.
I'm done with my tC and will be trading it in in the summer (sooner if possible) for something more practical and comfortable (but faster!!! LOL). My GS350 serves me as DD and I've only put less than 2000 miles on my tc since January of last year so there's no need for me to keep it.
I'm sad to part with my car but it's time to move on.