Hayu Racing gets boost !!!!
JPand Simon where nice enough to let me turbo there cars over the weekend.
Heres some detials of the build:
You can also read more here: https://www.scionlife.com/forums/viewtopic.php?t=167191
JP's setup:
T3 Egual length style turbo manifold flanged with a Tial 38mm wastegate flange
Garrett GT3071R .63AR/small compressor housing ball bearing turbo
Tial 38mm wastegate
Greddy Blow Off valve
2.5" downpipe(inlcudes s pipe)
Dump tube for wg.
Intercooler(no cutting required), 2.5" aluminum chargepipes, hoses/clamps
Running 9 psi tuned on Greddy emange with 650cc injectors(those will come in handy later but a bit overkill for now)
Pictures of JP's set up and a dyno plot:



Keep in mind on the dyno, we were not trying to make as much power as we could, I just wanted a nice usable powerband. Has a very conservative tune with a bunch of timing removed and afr's between 10.5-11.5, so I have plenty of room for more power. This was also with a 2.5" dp factory b pipe and the strup axle back.
Simons kit is almost the same(hard parts) but is using a smaller GT28RS .63AR and a simple bosch recirc style blow off valve. His car is running 5psi with 440cc injectors.
Pictures of Simons kit: You'll notice a small change in the manifold which will be standard to all production pieces.


Car pict:

Regards-
Todd
Heres some detials of the build:
You can also read more here: https://www.scionlife.com/forums/viewtopic.php?t=167191
JP's setup:
T3 Egual length style turbo manifold flanged with a Tial 38mm wastegate flange
Garrett GT3071R .63AR/small compressor housing ball bearing turbo
Tial 38mm wastegate
Greddy Blow Off valve
2.5" downpipe(inlcudes s pipe)
Dump tube for wg.
Intercooler(no cutting required), 2.5" aluminum chargepipes, hoses/clamps
Running 9 psi tuned on Greddy emange with 650cc injectors(those will come in handy later but a bit overkill for now)
Pictures of JP's set up and a dyno plot:


Keep in mind on the dyno, we were not trying to make as much power as we could, I just wanted a nice usable powerband. Has a very conservative tune with a bunch of timing removed and afr's between 10.5-11.5, so I have plenty of room for more power. This was also with a 2.5" dp factory b pipe and the strup axle back.
Simons kit is almost the same(hard parts) but is using a smaller GT28RS .63AR and a simple bosch recirc style blow off valve. His car is running 5psi with 440cc injectors.
Pictures of Simons kit: You'll notice a small change in the manifold which will be standard to all production pieces.


Car pict:

Regards-
Todd
Originally Posted by cliffud
very nice work. i'm really impressed with that manifold - reminds me of something out of the full-race shop.
so are you the go-to guy for turbo installing and tuning?
so are you the go-to guy for turbo installing and tuning?
yap, he is the one
Originally Posted by cliffud
very nice work. i'm really impressed with that manifold - reminds me of something out of the full-race shop.
so are you the go-to guy for turbo installing and tuning?
so are you the go-to guy for turbo installing and tuning?
he is the guy who was showcasing the turbo XB at right toyota..
very nice work. i'm really impressed with that manifold - reminds me of something out of the full-race shop.
so are you the go-to guy for turbo installing and tuning?
so are you the go-to guy for turbo installing and tuning?
Regards-
Todd
Originally Posted by TurboToyotas
very nice work. i'm really impressed with that manifold - reminds me of something out of the full-race shop.
so are you the go-to guy for turbo installing and tuning?
so are you the go-to guy for turbo installing and tuning?
Regards-
Todd
Originally Posted by hayuracing
there is enough
icons on this page to creat buddhist temple!! 
(I really don't know the significance of that, but when I was in Korea we visited a temple in a wilderness area near Daejeon and there were little stacks of rocks everywhere. I thought it was cool.)
Originally Posted by dudehitt
Originally Posted by hayuracing
there is enough
icons on this page to creat buddhist temple!! 
(I really don't know the significance of that, but when I was in Korea we visited a temple in a wilderness area near Daejeon and there were little stacks of rocks everywhere. I thought it was cool.)
Originally Posted by Silver_Turtle
Originally Posted by dudehitt
Originally Posted by hayuracing
there is enough
icons on this page to creat buddhist temple!! 
(I really don't know the significance of that, but when I was in Korea we visited a temple in a wilderness area near Daejeon and there were little stacks of rocks everywhere. I thought it was cool.)






