Muffler shop
Any know a good muffler shop... I have my alphawerks headers I wanna put back on... Took it off because I didn't like the raspy sound with the evo2 exhaust i have.
Thinking about getting a 2 16" resonators and a 2.5" midpipe. Just wondering if there's a shop that will make the pipe and wield the resonators in. And about how much that would cost vs just buying a midpipe like Megan's.
Thinking about getting a 2 16" resonators and a 2.5" midpipe. Just wondering if there's a shop that will make the pipe and wield the resonators in. And about how much that would cost vs just buying a midpipe like Megan's.
If you are gonna do it get a custom one done. Put in a highflow cat (to replace the cat you took out when you put the header in) and I have heard great thinga about the Aero 25 resonators...
As far as shops, don't really have any recomendations...its most likely gonna be $150+ parts. Make sure you get at least 2.5" piping to match the s-pipe, and axle back.
http://www.automotiveconcepts.net/st...medium=organic
^link for a good size/flow convertor
As far as shops, don't really have any recomendations...its most likely gonna be $150+ parts. Make sure you get at least 2.5" piping to match the s-pipe, and axle back.
http://www.automotiveconcepts.net/st...medium=organic
^link for a good size/flow convertor
If you have a high flow you can probably get by with one resonator.....hard part is finding a local shop that will put it together.......Aero 25 or a good 12-16 inch res will do the trick.......if it does not get it to tame down go with another resonator......
I have the cat and 2 12"resonators and it is a lot better.....still not pretty........but I still have the TRD muffler.......
I have the cat and 2 12"resonators and it is a lot better.....still not pretty........but I still have the TRD muffler.......
Thread
Thread Starter
Forum
Replies
Last Post
Sgtfluffy16
Regional - Northeast
3
Jul 28, 2021 10:32 PM
xBrelease08
Scion xB 2nd-Gen Wheel & Tire
12
Feb 29, 2016 05:39 AM










