i just got my first scion tc, I'm 17 and I dont know much about adding on anything or changing anything...and i just want to know how hard it is to change my regular exhaust to the greddy evo2 exhaust, and how to do it..thank you

 

its pretty easy..

all you do is go buy the exhaust, which is only an axle back and not a catback so dont be fooled.

then you go under your car, if it is at stock height you dotn really need to lift it, but anyways you will see two spring bolts holding muffler and midipipe together.

unbolt those, i am not sure what size they are anymore, but once they are unbolted you will have to take the muffler off of the car, it is attached still by 2 or 3 hangars.. it may or may not be hard to take it off, just use some WD40 and a BIG flat head screwdriver.

than reverese the process.

 

tell me how that goes cause im geting the same thing

 

thank you so muc bro!and any tips on a injen intake?

 

it wasnt hard at all it was actually pretty easy

 

u did it already?

 

yea..he told me so idid it..now just for the intake..how much do you think that would cost to bring it to a shop? cause i dont have a jack or anything

 

jack? intake? um, i did it in the driveway, didnt even take it into the shop lol

 

hmm I thought you needed to take out the front left tire?

 

You don't have to, it makes it easier, but it's optional.

And you can use the jack that came with your car...

 

wow.. good kid man, you listen well and did that already. here are the tips for the intake:

you dont have to take the wheel off, just turn the wheel all the way to the right so you have some room, then you can pull the splash guard back.

anways its way to long to explain so here is the site that most use to insall the intake..

if yours is an 07, then you wont be able to install it

http://www.kandn.com/instructions/69-8607.pdf

that a link to it

 

do you know what intakes i can use

 

None yet. 07 engine's are slightly different (02 sensors I believe)

 

well you cant use any right now.. no headers, turbos, or intakes will fit because of the slight differences in the MAF sensor, and the manifold.

however i am pretty sure injen is workin on an 07 intake so jus be a lil patient.