no issues at all with my wheels man. never had any of those funky vibrations.. not even at 137 mph.. ride is just smooth...

when and were.. ill bring the pop corn and seat harness

wheels do not have the rings.. and its more a ? of / do you need hubcentric rings or not... they basically go on the center of the hub inbetween the hub bore of your rims and the oem rim hub centerer on hub of the knuckle.. if u experience alot of vibrations at high speeds of even low cruising speeds that were not taken away when you got your wheels balanced then odds are u might need the rings to accomodate the gap and keep the wheel from vibrating on them studs from the holes being to big.

 

LMAO!!!

Well the only vital thinggggg, I need to install is the axle.

I think i'm just gonna save everything else for a later install date. After taking it for a spin over the weekend, with the new tune I made ^^ it feeelllsss great as it is....

For later date will be: walbro fp, Apexi Boost Solenoid, Swap valve cover, EGT sensor, fuel pressure sensor, fuel rail, fpr, return line, radiator.

 

BTW, I have the tune as close to what I feel is safe for a street tune. The rest is up to kiko's tuner.

Hopefully I saved myself some time and money, lol.
He just has to do minor changes to the AFR as far as I can tell from the new datalogs I saved. Hopefully he can also push a little more timing too with the help of the dyno.

I was too scared to push it anymore, lol. I saw the knock voltage go up just a litllleeeeeeeeeeeeeee bitttttttttttttttttttttt.... So I stopped there.

 

the guy should be back already.... get'r'done.

BTW why dont u just have an install day.. invite some pp over... and we get all that ____ done in 1 bounce.. im down.

 

ok, i didnt think they would be absolutely necessary. the Volks didnt come with any rings thus me asking. i figure as long as they are balanced and mounted correctly i shouldnt have any probs.

i have new pics of the goodies will post after class tonight!

 

its not always a need... sometimes.. but i doubt on the 18s ur gonna feel much... post pics now!! lol dont make me hax ur pb lol

 

did i hear an install day coming up??? lol maybe you guys can help me get this damn oil catch can in already. was under the car this weekend, and saw a spot where i might be able to put it.... only thing is its under the battery tray. figured id probably be emptying it out when i do my oil changes so figure id be down there anyway. also... pete, you had mentioned a few weeks back that a rear camber kit wasnt needed that you can substitute some washers or something? how exactly did it go? might have to look into that since i really wouldnt like to spend 200 on a set if i dont need to.

cedric... nice purchase... how about some pics


serg - TUNE!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

 

Yea I guess we'll need another install day, lol.

For denny, me, joe? =D

I nnoooo I noooo tuneeee, lol. I need to get the axle in asap. As soon as it arrives tomorrow. According to Pete's instructions it shouldn't be that hard. So i'll try my hand at it.

As far as the catch can. I think its a must. Mine is definitely picking up crap =p

 

im down for an install party... i've got some crap that needs to go on. denny if u want ill swing by the meet on wed. and explain it to you. but really its just getting a longer bolt for the control arm that grade 8 or higher and washers.. thats all.

 

Moroso is looking HAWT!

 

How can you run shims on our rear suspension??

The stock camber bolts move that banana control arm. I dont see where the shims will go??

 

Sorry I had to, lol

 

just a teaser, they aren't on the car yet =\ was supposed to get em on this past weekend but i've been studying my ___ off for night classes







i think the red lugs and red Volk decals for the wheels will look good. i'm gonna be removing the old blue ones tomorrow.

 

^excellent choice cedric! baller status

 

Its official...actually registered for the autoX...

I just had to blurt it out to someone, lol

 

Mind if I tag along? =D

 

YES!!!...

lol of course not

 

now ur doing it big baby... A+ let the playa haters ball begin **snap snap hate hate hate hate ** lol


ahh my friend u have much to learn my young padawan ill try to swing by wed and explain it to you..

 

O well I know my hotchkis control arms got my alignment perfect, lol
Ill be ready to learn if I go to the meet wed.

 

when are you hitting up the autox? im might be down to go watch