Hey guys i just recieved my demon eyes from jlevi and i have this wiring harness but i am unsure about 2 of the wires, where do they go ? ...Also what wires do the two coming from the ballast go to ?? .....i think they go to the end wires that have the plastic sleeve on them right ? ...but then what do u splice to the parking lights ? im confused....with this relay, is it really needed if im hooking them directly to parking lights ??....someone please give me some help


thanks


A link to the page as well
http://community.webshots.com/photo/...19736007jDwdJN

 

Easy Fix... Throw the Harness away...

Just follow the two wires to your "City Lights" and use T-taps to tap into them and run the positive and negatives to the DDE Ballasts... or disconnect your city lights all together (as they won't match the DDE's anyways, and run those wires to the DDE ballasts....

They work just fine and pull VERY little power...

A Voltage tester is helpful for this and cheap if you don't have one... maybe someone could tell him the colors for 12v and Neg. on the city light harness.

Hope this helps...

 

Could you draw that schematic up? I'm having sooooo much trouble with this darn harness, thank you so much.

 

This page has a little more info about the relay... but you really don't need to use it.... just tap into your city lights on both sides and you'll be good to go

https://www.scionlife.com/forums/vie...lay&&start=325

 

wooot much cleaner way than the damn harness too!

 

Much easier to install too.. as you don't have to run wires all over the place.