Item: LED Flasher Module Relay

Model: CF18-08 (part# 81980-50030 066500-4650)

Function: Fix Hyper Blinker Problem while Replacing LED Signals

Application: 05+ Scion tC & 07+Toyota Camry/Solara & 08+ Toyota Tundra/Tacoma


Following are some reference on how to replace your Flasher module and how to find the right LED bulbs from our forum members.

• https://www.scionlife.com/forums/scion-xb-1st-gen-aero-exterior-1607/xb-my-easy-clear-tail-light-mod-68870/

• https://www.scionlife.com/forums/sho...=flasher+relay

Link to Classified Here

 

Will this work to correct the flash rate, regardless of how many bulbs are switched to LED's? I'm looking to replace both front and rear turn signal bulbs with LED's.

 

Hummm. I may do this soon.

 

Yes 1 flaher relay is good for all 4 corners whether you have full LED or not.

Please refer to above links for more detail.

Panson
TWP

 

Bump for a must for LED Mod

 

Where in the car do i find the flasher module for the tc?

 

next to the fuses... behind the access panel... on the lower left portion of your dash... if your ignition is in the "on" position, turn your signal (right or left) on and you'll hear the flasher clicking...

 

***Warning***

Flasher Relays do disable your lights from flashing when you lock and unlock the car.

 

I kinda want this so that I don't have to solder resistors to my LED turn signal

 

The Bad: light won't flash when you lock or unlock your car...thanks Aurora

The Good: plug-n-play, no soldering or splicing any wires. 1 relay is good for all 4 LED corners. If you decided to go back, just take out the new relay and put in the stock one.

Panson
TWP

 

Bump for a cheap & easy mod that gives you the flexibility to go LED.

TWP

 

BuMP~~ EASY WAY TO GO LED!!!

 

Bump...
Why bother soldering load resistors while go LED on corners.
Simply swap in our flasher Relay and you get a no hyper blinking after LED Mod.

If you are going back to stealership for warranty issues, just put the stock relay in and have no problems

 

^ Relay won't void warrenty, so no worries there.

 

Thanks for letting us know

Bump for a great way to go LED.
No more Splicing/Cutting/Wiring/Soldering. Just swap in the new realy and put you LED bulbs in.

1 Relay is good for all 4 corners of LED signals.

Sincerely,
TWP

 

Any word yet on how to get past the flashing lights on lock and unlock deletion?

 

2nd version CF19 relay is available now. New relay won't delete flshing lights while locking/unlocking.

Here is the discussion from other forum
http://legacygt.com/forums/showthrea...16#post2961016

 

1 relay is good for 4 corners of LED.

No more cutting or splicing.

 

CF-19 relay will disable hyper blinker and still maintain your stock setting.
Warning flash light won't be disabled on this latest CF-19 relay.

Sincerely,
TWP

 

CF-19 relay will fix hyper blinker for LED mod and still maintain your stock setting.
Warning flash light won't be disabled on this latest CF-19 relay.

Sincerely,
TWP