sorry to just post, i havnt had the time ti look im in the process of doing work to my headlights, and since i have my front bumper off i was going to install my fogs, anyone know where i can find a install guide for these fogs??

http://www.k2motor.com/lf-tc05g-wj.html


they look extremly nice but i thought it was gonna be plug and play and its not, its basically run the entire wiring system they have with it... lol thanks

 

taking headlights apart in the oven is freaking hard, the intructions make it so damn easy!!!!!! uggggggggggggg anyone??

 

hmm...there are DIYs for oem and VRD/APT fogs...FYI there is a stock Ground loop behind the bumper and a pre-ran wire from the switch bay to the front bumper for fogs. made install of my VRDs real easy....
GL

 

If you have the same harness and wires as shown in those pics then it basically is plug n' play.

https://www.scionlife.com/forums/viewtopic.php?t=27616

The installation guide in that thread is what you should read. Just skip over everything else about the OEM fogs and their fittment and blah blah blah. Just focus on the wiring (pictures 4, 5, 8 & 9). The wiring harness you have is the same as the OEM. And if you've got the entire bumper off this should take you 20 min max.

You can find tons of goodies in the tech section of the forum.
Good luck.