So I bought some fog lights from a fellow SLer. I know how to hook then up, but this particular set came with led strips integrated. Aside from the normal wires, there are two additional wires (both black) on each side specifically for the led strips. Where would I wire these to? Anyhelp would be appreciated. Thx

 

Any POSitive wire that draws +12v current. Then ground the NEGative wires elsewhere or tap them. LEDs don't draw a lot of power.......if you already didn't know.... lol

 

So theoretically I could just splice them with the power wire of the fogs?

 

Plus they're both black. There's no indication of power and ground on these.

 

Well then you will just have to run a test; cuz those must be some cheap LED strips off ebay, and LED's will only light up directionally (light output and in the circuit)