Yep, those are 08 projectors. Thanks.

 

I have a BSP with the kenstyle front kit (Im a tech at toyota & that's how i got it, perks of the job) I also have the same problem on what kind of foglights to put. When I installed the kit, I had to push in my autozone fogs and now you can only see half of it. I want to replace it and Im thinking about the VRD fogs. It might fit but with slight modifications on the bumper itself or the kit. If I do get the VRD fogs and make it fit, ill post pics.

 

 

Are their vrd's in there?? lol I cant tell.

 

nah those are still my old fogs. I didn't get the vrd's yet.

 

Finally I installed my VRD foglights and painted them yellow. and yes it fiits the kenstlye front kit.

 

I just got my friend to do a custom led fog lights for my rs3.

 

It looks like you have the fog lights sitting behind the vent covers. Did you do that because you wanted to or because you had to due to the fact that they will not fit flush with the grill like on a nornal tC? Is it at all possible to make they fit like they do on a normal tC?

 

I have some nice quality yellow Japan fogs I got off my boyfriend's car. They are 3M'd to the frame behind the lower grille.

 

KP, its the only way I can install the foglights with the kenstyle kit. I don't think there's a foglight kit that fits over the mesh screen or outside the kenstyle lip.


here's a picture of the fogs without the kenstyle lip.
And I moved the grey wire that goes to the headlights and tapped it to the park lights so I can turn the fogs on without turning my headlights on.

 

alright thank you for the info. I thought i saw somewhere on SL how to fit them to Kenstyle kit. if i find it ill be sure to post here. Unfortunately i think it involves cutting the back of the kenstyle kit or something like that.