ok... i busted my fender up.. i have like a 2inch by 1 inch chip (i know its big) and then a scrape which runs along my fender.. its NOT EASY to notice but you'll notice it...

i bought touchup paint from the dealer... i hear to use bondo but im not sure... i was going to prime it.. with a black primer.. then use the bsp touchup paint for the final coat.. then depending on the gloss i would clear coat it... do anyone have any suggestions or ways to do it ???\

here are the pictures...
(first one is colored in with a sharpie so mom didnt notice)
http://img444.imageshack.us/my.php?i...ture059zd7.jpg
http://img252.imageshack.us/my.php?i...ture060ls0.jpg

 

ne1???

 

Give it more than 31 minutes and you just may get an answer.

 

Better pics would help too...

 

Try macro mode on your camera bro.. jesus.

 

what happened?

 

everyone shud know wut a chip and a scrape looks like...
i will either prime-> touch up -> wet sand -> buff
or use some bondo to even it out first.. any suggestions?

 

I'd take it to a professional if I was in your position.

 

its not that bad to take it to a pro... with a little diy help it can be done i beleive

 

HERE IS ANOTHER PICTURE WHICH SHOWS IT ALL... THE MAJOR CHIP TO THE LEFT IS SHARPIED...

how much do you think the dealer will charge to fix this???




CLICK LINK FOR BIGGER **********