lock please vrd install help
08-17-2008, 07:04 PM
#1
Member
Scion Evolution
Thread Starter
Join Date: Dec 2007
Location: SoCal
Posts: 30
lock please vrd install help
need help with vrd fogs with oem fogs harness, i currently have the oem fogs in stalled but what changes do i have to make to fit the vrd's? and yes i did search before i posted!
08-17-2008, 07:19 PM
#2
Member
Scion Evolution
Thread Starter
Join Date: Dec 2007
Location: SoCal
Posts: 30
bumpie
08-17-2008, 08:08 PM
#3
Senior Member
SL Member
Join Date: May 2005
Location: Bay Area
Posts: 4,790
u should be able to just plug in the vrd fogs from the bumper and keep your OEM switch.
08-18-2008, 12:02 AM
#4
All you have to do is switch the wires that connect to the fogs. There is a plug that is located on the drivers side behind the bumper. If you have a CAI, it will be right near where your filter is located.
08-18-2008, 01:14 AM
#5
Senior Member
SL Member
Join Date: May 2008
Location: West Lafayette, IN
Posts: 680
What was said above. The connector for the fogs is just in front of the driver's side wheel well.
08-18-2008, 03:45 PM
#7
Member
Scion Evolution
Thread Starter
Join Date: Dec 2007
Location: SoCal
Posts: 30
thanks guys i was screwing around with it yesterday and it worked, ok how do i erase this now.
Thread
Thread Starter
Forum
Replies
Last Post
TheRedBox
Scion xA/xB 1st-Gen Drivetrain & Power
31
12-02-2003 04:53 PM