ok so i just installed my lip kit a few days ago front lip and sides skirts are perfect no issues with them at all. i ordered all my parts seperate off ebay. and no issues with front and sides. but the rear lip im having issues with. well to start its made of polyurethane and is really flexable. and it fits almost perfect except where you get to the middle. it sags down. i need some suggestions on how to fix this. the kit came with 2 brackets which i installed where it said to on the right and left side. but nothign for the middle and im confused on what i should do to fix this. i need help!!!! im ready to just throw it away cause its frustrating the hell out of me and buy a abs rear instead..... here is a pic of what im talking about.

 

i used double sided tape all the way around and it stuck on perfectly fine, really strong actually.

the middle actually is where its suppose to be btw. just the others are higher up, but i told you about that before

 

yea i figured that but i actually like how it looks up higher some and this way i dont have to do anything with the exhaust.
but the guy i bought it from ebay from actually said where i had it on the sides is where it should of been actually. i dont know if its because its not abs plastic maybe its different but he told me the same just get some 3m double sided automotive tape ether that or i might try and lower the sides down some tommorro see if that works.

 

yeah i used 3m tape allll the way around and it stuck on pretty good, no problems

 

yea thanks for the info. im just going to give the tape a try first see if that hold good. it just got frustrating trying to fix it earlier i almost took it off and threw it in the trash lol. cause apprently the 3m double sided tape i have didnt want to hold it at all.

 

nah no worries man, mine slipped off bc i didnt put tape in the middle, so i just bought new 3m tape at autozone and taped all around and boom no problems. mine is only held on by tape and 2 screws (one on each side)

 

really. hmm mine has 2 screws on each side. and there was brackets that bolted to the bottom of the lip. that i used. so will def have to get some tape lol.

 

haha yeah and the only reason i put on a screw on each side was bc i didnt want it to get stolen easily lol. never had a bracket for mine so you got that one on me lol

 

haha. yea the brackets is what held it up so high on the bumper. but i think it looks good where it is just going to fix the middle then im done.

 

do it! more security of holding it up/not getting stolen

 

yeat true cause you have to take a hell of alot of bolts out right now to take it off lol. 8 bolts in total to remove my rear right now haha.

 

8 bolts!? dang dude all you need is 4 and double sided tape from one side to the other side and you're good

 

yea i know that all im suppose to have but for some reason the way this lip mounts is alot different then any other rear lip i have ever mounted. im assuming its the way its made, cause it also mounts alot higher then the reg abs rear lips. assuming cause its made of polyurethane maybe somthing different about it because of that. there is 2 on each side. and then there is 2 brackets that go on the bottom of the lip that have 2 screws each on them. weird lol. but its fixed and sits right now.

 

Cool