haha they will be posted tommorro. didnt have time to finish it tonight was starting to get dark. when i got done with everything lol. here is the only pic i have of the kit before clear coat last weekend. lol. installed pics coming tommorro lol.

 

actually just saw the pics on your thread, looks good man. but i think your exhaust is going to get in the way of the rear lip. you might have to either bend the hangers or pull the exhaust down by putting something in the hangers

 

thanks. spray paint can turn out good every now and then haha. and that pic was before the clear coat i didnt have any clear coat on it at all yet. yea i know im probolly going to have to do somthing to the exhaust.. it was pretty close when i test fitted everything. so i will figure it out tommorro when i put it on.

 

Where is everyone getting their OEM Front lips from?

I got a set of side skirts just looking for the front lip.

 

you can get them from trdsparks.com. but its not painted only comes primered from them if you are only getting the front lip.

http://trdsparks.com/displayparts.ph...7&parts_id=585

 

Yea Duplicolor is great, Congrats on the DIY to the kit it came out good. I'll officially be on this thread as well tomorrow.I picked up my kit,rear spoiler,& roof spoiler today from the shop.Went home and got to it I installed everything except for the rear caps.Ran out of sunlight, LoL so I'll finish it up tomorrow along with taking some pics and then post them up.Sorry Flint, that install bug started kicking in

 

thanks. ^^^ haha i know that install bug hit me to. i got off work and decided to go ahead and start. anxious to get it on. . and def looking foward to see yours. been waiting to see your roof spoiler cant wait to see how that turned out. what rear spoiler did you end up getting? i have been looking at a few and leaning towards the big style lip spoiler.

 

Dude that looks really good for a rattlecan job. Once you clear it, wetsand, wetsand, and then wetsand some more and it will look perfect.

 

damn, this is a really good paint job u did there.

 

OEM lip spoiler but it looks a little bigger to me, but not like the big lip one.As for the roof it looks good it sits perfect and it doesn't slant up or is that big like everybody thinks it is, I like it.

 

thanks, yea that pic that is posted above is not clear yet. but if you go back to page 72 i posted 2 pics of the front lip installed after i clear coated it and put 3 coats of wax on it.

 

thanks. luckly i had someone that knew what they were doing with spray paint helping me out. so it turned out awesome. spent in total $50 when i was done.

 

Did you look at McGeorge? They're cheaper than Sparks.

 

Yeah, I looked there I just wasn't sure if I was missing any other place.

Competitive Price Shopping FTW.

 

ok so as promised here is the rest of the kit. side skirts fit great. rear lip is off a little bit. but its not made of abs plastic its made of polyurethane plastic so fit is a little off but not major, exhaust just clear the lip but i can see after a test drive im still going to have to get the exhaust ot hang a little lower cause it start to burn it a little











also figured i would post this up. as you can see in the rear lip pics above the rear lip is almost touching the lip. and after a test drive it actually starting to burn off the paint on the bottom a little bit. but here is a after pic. all i did was upll the exhaust downward some and put a socket in it. and it dropped the exhaust down i would say a half a inch.

 

yeahhhhhh!!!! looks great man the socket idea is a great little trick

 

^^^thanks, yes it is a great trick.. it brought my exhaust down just enought to were it wont burn now, and i can fit a finger all the way between the exhaust tip and lip. next up is vrd fogs, and wheels

 

can you explain how the socket trick works like where you place it?

 

yea np. all you got to do is where you exhaust tip is the rubber hanger that is holding on that side. just take a socket and push down on the tip and put the socket into the rubber hanger and it will make the exhaust sit a little lower. the socket just goes in the hole in the middle of the rubber hanger.

 

Hmm ok btw what size socket did you use.