speedy000

iTrader: (2)

I have a 08 spec n I ordered the sunroof n all parts to install it now I need some help on getting it on. Anyone have pics of the headliner off so I can see where the bolts are. Or any links to help me out. I've searched and Have had no luck finding anything useful. Any help would be greatq

SATownScion

take it by DnA mods on the southside. Its our Sciko chop chop

speedy000

iTrader: (2)

Andy always seemsbusy didn't feel like taking away from his time. If I can't figure it out I'll stop by

SATownScion

i think he has gotten some of the bigger jobs out of the way. pretty sure all he has left is the 80's truck but cant be too sure, havent been to the shop in the last 2 weeks.

speedy000

iTrader: (2)

Eh we'll see. So far I can't even tell how to take off the solid glass roof.

SATownScion

have you tried pm'ing UNiT_xEr0 from the other thread?

speedy000

iTrader: (2)

Idid and he didn't have pics. Text alone does not make it clear how this things bolted down

combatsteve

why don't you just take the headliner off since you will have to anyways. Then you can see them for yourself. I don't get what you are trying to see in a picture.

speedy000

iTrader: (2)

well for one my car doesn't have a motor n harness up there! I want to see how it goes

yellowxhoodie

iTrader: (16)

this is one area of the tC ive always wondered about.
only i always wonder how to take it out, not put it in. lol

UNiT_xEr0

take out the headliner it isnt hard, then theres bolts that you just unbolt. its gonna take two people to take off the spec glass roof

speedy000

iTrader: (2)

What about the harness where does it connect!?

UNiT_xEr0

the harness runs behind the guage cluster, so you have to take out your guage cluster to reach it. what you wanna pull out and remember where the spot is, follow your spec dome light wire (this is where the harness will connect) and like i said before make sure you have the fuse i'll double check tomorrow but i believe its a 25 mini amp fuse

UNiT_xEr0

the fuse will be connected by the kick panel where the interior fuses are. i will try and get you pics when i get the chance

Socal_Shara

i changed out y roof for a cf roof. the intire glass piece comes out in one piece. there are some mounting brackets you want to take off and basically just find all the nuts and loosen them, and pry up on the 3 piece glass to get it out, ounce its out and can change out the middle glass from its frame

speedy000

iTrader: (2)

Bla so I néed to take my dash apart!? Where does the harness run though to get to the cluster!? A-pillar!?

Socal_Shara

it plugs into the lower left hand fuse box, theres a panel you can pull open, you don't need to take the dash off you can run it down the a pillar. ounce you get the headliner you'll see all the nuts and bolts you need to take off. When all the bolts are off you really have to pry up to losen the frame. All 3 glass pieces are held in to a frame, and the frame is connected to the car. so just losen the frame bolts alont the sides. some of them are in deep holes, so i think if i remember you need deep well sockets.

Socal_Shara

it plugs into the lower left hand fuse box, theres a panel you can pull open, you don't need to take the dash off you can run it down the a pillar. ounce you get the headliner you'll see all the nuts and bolts you need to take off. When all the bolts are off you really have to pry up to losen the frame. All 3 glass pieces are held in to a frame, and the frame is connected to the car. so just losen the frame bolts alont the sides. some of them are in deep holes, so i think if i remember you need deep well sockets.

speedy000

iTrader: (2)

Ok so say the harness connects to the fuse box in the kick panel what is zero talking about behind my cluster!?

UNiT_xEr0

^ yeah lower left or something i was going off with what my audio guys told me since they are the ones that did it. it took him 1 hour to get the old roof off and the new one in.