I just got my Fujita cold air intake and the check light came on. can someone tell me whats the problem?

 

it should b the computer re-learnin drive for about 30 miles if not double check everything

 

unconnect your battery for 5 min and then re-connect. once a new CAI is on (injen, aem, fujita, ect...) it will at first. just unconnect/reconnect battery to reset everything and should be fine

 

Make sure you tighten that maf really good.

 

what year do you have? if it is an 07-up you need to make sure that you got the new MAF sensor pipe from fujita. Their first design the pipe was too big and the air readings were wrong so it would cause a CEL. The pipe had to be 2.5" in diameter

 

alright thanks everybody. i will update and see how it goes

 

alright i drove my car for about 2 days and the CEL came back on. what do i do? i already tried disconnecting the battery, that didnt work.

 

people dont listen, there is nothing you can do if the pipe is too big, you will continue to get a a CEL

read this thread especially the last page,


https://www.scionlife.com/forums/sho...=100285&page=4

 

so which intake pipe would fit?

 

you have to get in contact with fujita

 

you think i should get the HPS short ram?