Dude its obvious that you have to go with MMW, HANDS down!! Why even post a topic. :D Gotta go with the best set of headers out there. And don't forget to top it off with an axle back from PrecisionMuffler.com to control the rasp. :D

 

i have the strup header. I'm installing it very soon. Just need to find an s-pipe. quality at its best. Awesome

 

I have also done a lot of research lately. I have seen some Dyno sheets that say Alphaworks is better then Meganand DC Sports, on a bone stock TC. But, if you look at the Dyno numbers of the Supercharged TC's with the Megan header, they are putting out more HP and TQ then TC's with the same setup with the Alphaworks header. I then seen that MMW adds around 26HP and 24TQ, but they did not present this information very good. I can't tell if it is just the header and S-pipe that gives you this number or if it is the MMW header, S-Pipe, Intake, and Exhaust together that gives you this number. I do have to admit that tekisui is putting down 183.3hp/191ft-lbs with this header. But, then there is aarontrini85 running a 14.7 with a similar setup as tekisui, but has Megan Headers. I then see that somebody with a 5spd tc that ran a 10.405 in the 1/8th mile, after they put on the MMW header. I am currently running the 1/8th mile in 10.26 with only a Megan Exhaust. So I don't know what header to go with right now. I would like to see an independent dyno of a TC with a a full exhaust, crank pulley, cold air intake and a stock header. Then, I would like to see the dyno sheet of 4 different headers run on this setup. I would like to see the dyno on the DC Sports, Megan, MMW, and Alphworks. I think that most people that will be getting a header, they will also be getting a exhaust, intake, and maybe a crank pulley. If somebody could do this, it would clear all of this up. Could KillertC.com/GSCMotorsports.com do this test?

 

another thing to keep in mind: Remember that all hp numbers will vary from car to car. so what makes 20 hp on one car may only make 15 on another.

 

How much did you guys pay to get the 30 in resonator installed on your car??? I just got the alphawerks header, and im gonna wait until i get the resonator installed, i have a stock exhaust, does it still rasp even then??

 

I guess MMW is the winner...I'll be saving up for it then.

 

I also run the 1/8th, im turing 9.9's at almost 73mph with only HKS axle back and a Injen CAI. I also just ordered a MMW Header, Im hoping with I/H/axle back to reach 9.7 in the 1/8th. Then by X-Mas I should have Pulleys and a TRD SuperCharger. Im shooting for low 14's maybe high 13's by the time im done modding.

 

That is a great time in the 1/8th nile with the mods you have. What was your reaction time?

 

Remember guys, it's called a HEADER, we don't have any v6 or v8 engines here lol!

 

It wasnt to good, But it was .692 on a .500 tree. On stock tires also.

*EDIT* My friends attributed it to me being a decent driver. */EDIT*

 

watching

 

anybody know if strup actually fixed their fitment issues?

 

The MMW header had some fitment issues as well, but I didn't know that the Strup also had fitment issues? I think the MMW had been fixed though.

 

a few guys did get the strup or will be getting it any time now - someone also said that the strup has also been fixed.

 

Does the resonator reduce power?

Hey 06 superwhitesocal_tC..do oyu go to irwindale dragstrip?
I've been about 3 or 4 times..and the best time's I could pull were 10 flats. I have a custom intake and trd axle back and a short shifter on stock tires. My rt's range from .506-.640.
What's your MPH and 60 foot?

 

bump for answer...

 

Does anyone ever answer questions around here?

 

I would like to know as well...

 

I used to go more often but, promotion at work = less leasure time and more work. Don't remember my 60' off-hand but my MPH were around 71-72. Now im Supercharged and run around a 9.19 @ 77mph I think it was, Fastest poseted time for a S/C tC in the 1/8th so far.

 

I got the AW headers, i can feel the difference, but I am having fitment issues, so i some how have to fix em