Hey guys

i installed my dc headers a couple weeks back and the cel just started lighting up. now im trying to do the anti foulers trick but i have a couple questions on it>>>do i need to drill a half inch whole all the way thru the first non fouler or just enough to tighten the o2 sensor to the threading of the non fouler? 2nd, i was reading a post earlier where someone turned on the iginition THEN disconnected the terminal to reset the ECU. Is that even safe to do? Anything will help. Thanks

 

it works..

 

you can try this link out https://www.scionlife.com/forums/vie...210&highlight= The part is only 25 bucks shipped from the guy. It was designed for Invidia's S-pipe, but since it's fits the o2 sensor hole I'm sure it would work, the only thing in question would be the angle it sits at. You should PM the poster and ask him about it. I've got my DC header sitting in my room, waiting for my 2 new o2 sensors, exhaust gasket, and invidia s-pipe to get in this week. Next weekend will be fun :D If, I can, I'll try to see if this part will work on the stock s-pipe for you if you want me to, just let me know.

 

It didn't for me. I tried about 20-30 different drill sizes and nothing. I followed step by step what others claimed to work, I even got desperate enough because I wanted to keep the cel off I bought the anti fouler mod and still nothing. Then I tried to the infamous mil eliminators aka o2 simulators and tried a few different ones and still nothing. Some tC's just won't respond and some do. Good luck and I hope it works for you but it didn't for me. I finally just built custom exhaust and relocated the secondary o2 sensor behind my one and only cat.