Strup Headers and Exhaust for tC - coming soon!
07-29-2005, 11:17 PM
#22
Senior Member
SL Member
Team ScioNRG
Join Date: Nov 2004
Posts: 859
Originally Posted by Thrawn
For the evil folk in non-Emission states and those that care more about their hair then the environment, please give us a cat-less exhaust, with a potent muffler, and preferably some reverb chambers to help w/ scavenging. 
I love driving at full throttle, with the smell of exhaust and burning clutch in the air on Ozone action days.
^_^
I love driving at full throttle, with the smell of exhaust and burning clutch in the air on Ozone action days. ^_^
08-04-2005, 09:07 PM
#24
Junior Member
SL Member
Thread Starter
Join Date: Jul 2005
Location: Philadelphia
Posts: 19
UPDATE
ok, some preliminary info to post back:
Headers - supposed to be a 4-2-1 design! Like the xA/xB header, they'll be high polished stainless steel, same great quality and construction! Gains should be very respectable for a header - certainly comparable or better than what's out there now. I won't have any dyno numbers until we can get our hands on a set and see what's up.
Exhaust - since you all asked, YES, it will be a cat-back exhaust!
Same build details as above - high-polished SS with outstanding fit and finish.
We'll keep you all informed as to an ETA and I'll post pics as soon as I have them. I might be able to get my hands on some preliminary pics or comparable design pics to give you an idea...
Thanks!
Headers - supposed to be a 4-2-1 design! Like the xA/xB header, they'll be high polished stainless steel, same great quality and construction! Gains should be very respectable for a header - certainly comparable or better than what's out there now. I won't have any dyno numbers until we can get our hands on a set and see what's up.
Exhaust - since you all asked, YES, it will be a cat-back exhaust!
Same build details as above - high-polished SS with outstanding fit and finish.We'll keep you all informed as to an ETA and I'll post pics as soon as I have them. I might be able to get my hands on some preliminary pics or comparable design pics to give you an idea...
Thanks!
08-05-2005, 03:29 PM
#27
Junior Member
SL Member
Thread Starter
Join Date: Jul 2005
Location: Philadelphia
Posts: 19
thanx Boxman. will do.
Header should look very similar to this, as long as it does turn out to be a 4-2-1 design. This is NOT the actual header. This is just to give you an idea.
.jpg)
Header should look very similar to this, as long as it does turn out to be a 4-2-1 design. This is NOT the actual header. This is just to give you an idea.
08-17-2005, 09:28 PM
#33
Junior Member
SL Member
Thread Starter
Join Date: Jul 2005
Location: Philadelphia
Posts: 19
I am definitely in close contact with Charlie at Strup about these pieces. no doubt you will know as soon as I do!
teksno - As for the exhaust design, it'll be similar to the Greddy exhaust design.
like dis:
teksno - As for the exhaust design, it'll be similar to the Greddy exhaust design.
like dis:
09-12-2005, 09:31 PM
#40
Junior Member
SL Member
Thread Starter
Join Date: Jul 2005
Location: Philadelphia
Posts: 19
Updates and clarification
Hey all,
Thank you for your patience. Believe me, if you're interested, it'll be worth the wait!
I just talked with Charlie over at Strup.
tC EXHAUST
The exhaust will be first part available, but won't be ready until early October - just some minor production delays. Also, I may have mislead you to believe that this will be a complete exhaust system. It is not. This will be an axle back exhaust only, similar to the xB exhaust we sell now. the pic I posted above was strictly reference to the muffler design... sorry 'bout that. He did talk about efforts in design to try to eliminate the raspy sound too. Will let you all know as things progress.
tC HEADER
My appologies again for a misunderstanding in the design of the header. This will be a 4-1 header design, NOT a 4-2-1 design. Charlie said this will be more of a race-bred design - going for optimal performance, but still primarily set up for street use. He said that this header will be taking longer to finish in production though. I don't have an availability date on this yet. Will do my best to keep you all informed.
Thanks again for your patience and understanding. We appreciate it!
Thank you for your patience. Believe me, if you're interested, it'll be worth the wait!
I just talked with Charlie over at Strup.
tC EXHAUST
The exhaust will be first part available, but won't be ready until early October - just some minor production delays. Also, I may have mislead you to believe that this will be a complete exhaust system. It is not. This will be an axle back exhaust only, similar to the xB exhaust we sell now. the pic I posted above was strictly reference to the muffler design... sorry 'bout that. He did talk about efforts in design to try to eliminate the raspy sound too. Will let you all know as things progress.
tC HEADER
My appologies again for a misunderstanding in the design of the header. This will be a 4-1 header design, NOT a 4-2-1 design. Charlie said this will be more of a race-bred design - going for optimal performance, but still primarily set up for street use. He said that this header will be taking longer to finish in production though. I don't have an availability date on this yet. Will do my best to keep you all informed.
Thanks again for your patience and understanding. We appreciate it!