want less raspy exhaust
06-01-2007, 08:35 PM
#1
Member
SL Member
Thread Starter
Join Date: Nov 2006
Location: new jersey
Posts: 99
want less raspy exhaust
With the setup i have, intake, header, s pipe, mid pipe and trd exhaust, it is really raspy and kinda like a fart can which i hate. What should i do to fix this...i was thinkin bout puttin on the stock muffler or gettin a precision muffler cuz i heard those were good with rasp.
06-01-2007, 10:52 PM
#5
Senior Member
SL Member
Join Date: Dec 2006
Posts: 460
I take it by S pipe and mid pipe you mean the stockers correct?..
the precision muffler would prob be your best bet, but you would be giving up some of your top end HP, BUT you would regain back alot of your low end TQ.
to shut that TRD axleback up, your gonna need either a huge single 33 inch long 6 inch body magnaflow resonator, or two 20inch long 4 inch body magnaflow res...you may still have a tid bit of rasp at WOT but you'll get to keep all of your top end HP.
the precision muffler would prob be your best bet, but you would be giving up some of your top end HP, BUT you would regain back alot of your low end TQ.
to shut that TRD axleback up, your gonna need either a huge single 33 inch long 6 inch body magnaflow resonator, or two 20inch long 4 inch body magnaflow res...you may still have a tid bit of rasp at WOT but you'll get to keep all of your top end HP.
06-05-2007, 06:10 AM
#7
Senior Member
Scikotics
SL Member
Join Date: Oct 2005
Location: Orlando, FL (UCF)
Posts: 7,514
your in orlando.... PM me and i can meet ya during the day sometime this week so you can hear my setup. I've got a MMW header/spipe, custom midpipe w/ 2x 18" resonators, and a PM axleback.
06-05-2007, 10:20 PM
#10
Guest
Posts: n/a
The PrecisionMuffler.com axle back will take care of that rasp problem that you have and is a clean look
http://www.precisionmuffler.com/id150.htm
http://www.precisionmuffler.com/id150.htm
06-13-2007, 04:47 PM
#14
Guest
Posts: n/a
Originally Posted by Mugetsu
Hmm... i didn't know the PM muffler was constructed out of magnaflow parts...i thought it was its own design...does it use a magnaflow "muffler" or just a magnapack?
