So Here is the list of my mods.. I am trying to think of what to do next.. What do you guys think?

 

pic doesnt work

 

there sorry, I tryed moving it and deleted it by accident

 

bottle warmer a purge and blow down rail a data logger would be nice and some thing to tune the car with like a camcon


maybe some new cams or reground cams and some 11:1 pistons from zpi and some colder plugs


the zpi mid pipe and spipe


a lighter crank pully and maybe


hotchkis sways

some 16" celica gts rims and dump the 20" lol but im sure your trying to go all show arent you??

let me see what else i wish i could buy lol

 

Seats/RollBar/Harnesses.

Redone OEM Guages...

I take your mods and bet my mods! (Darn Sponsored Cars... Hard to keep up with)


Audio Mods

• Pioneer DEH-6700MP
• Pioneer XM and IPOD Integration
• Image Dynamics CSX64 Cameleon Components
• TCover (Automatic Radio Cover)
• Custom Rear Box With Two 8-inch MTX Thunder 5500`s
• Eclipse Amplifier
• Silenced by RAAMmat BXT

Body Mods

• BSP Painted AutoPower Industries Roll Bar
• Tenzo R Type R Evolution Seats
• S2000 Antenna
• 35% Tint (Legal Limit)
• Debadged
• Factory Ground Kit
• Rear Lip Spoiler
• Redline Tuning Hood Lift
• Carbon Fiber Pillar Applique
• Door Sills
• Custom Tinted Front Reflectors
• Overlay`d Turn Signals
• Umnitza Daylight Demon Eyes
• Blue Undercar LED
• Blue Map/Dome LED Change
• Blue Custom Front Grill Lighting
• Blue Custom Front and Back Footwell Lighting
• Blue ZEX LED Purge Kit
• Red Painted Calipers
• Carbon Fiber Engine Cover
• CC A-Pillar Triple Guage Pod

Power Mods

• ZEX Nitrous 50 Shot Wet Kit
• ZEX Remote Valve Opener
• ZEX Blow Down Kit
• MSD Digital Window Switch
• NST Triple Pulley Set... Coming SOON.
• Megan Racing Header
• Injen Cold Air Intake
• B&M Short Shifter
• Greddy Air Diversion Panel
• OBX Sport Pedals
• Greddy Weighted Shift ****
• PrecisionMuffler.com Axleback Exhaust

Suspension Mods

• TRD Springs
• TRD Rear Sway Bar
• Tanabe Front Strut Bar

Wheel and Tire

• 19 Inch Konig Unknown Wheels
• 235/35R/19 BF Goodrich G-Force T/A KDW

Other Mods

• CarPC in Development

I NEED A TURBO OR SC NEXT...

 

lets see this "real" car

 

rollbar indeed

 

s/c

 

no no no n/a all the way



well i guess nitrous keeps him not exactly n/a lol but its n/a if he wants it to be

 

Mine? Just look at the pics. Here are some of them..






There you go METALRANGER33

 

yeah I am thinking roll cage and seats, Im going to make a cage for the car. I need to be able to use the back seats as I have to boys.

 

the roll bar that WeDriveScions has lets you take out some of the bracing so you can still use the back seat then put them back in so you can stiffen up the frame

 

Go with the autopower setup.... the cross/horizontal bars are removable, so you can add/subtract them for shows as needed... check my profile for pics... they make a full cage that can run that way as well...

Are you running a "Wet" or Dry kit, or a direct port setup... I'm stuck on my fuel line on my ZEX kit currently... Funny where you put your sels, cause my zex box is in the exact same place.... works great there with a CAI.

Looks like the NX is just for show... as there's no blowdown kit or heaters on them, but pretty dang beautiful setup...

 

a lip kit to just notcied that you dont have one and the tc looks a bit tall with thoughs big rims so a lip kit

 

A Hood lift kit.... to get rid of quasimoto the hunchback prop rod.... (Ingenious way to fix the diversion panel/prop rod problem though) Props for that idea.

 

I have a polished rod that I use at shows for the hood. But I do agree that ugly stock rod sucks.. LOL.. I will look at that cage for sure since it has removable peices to it.
As for the lip kit.. Im just waiting... already have one coming when it is done. It actually sits pretty decent even with the large wheels. alot lower then alot of cars out there. I have been tossing around the idea of lowering it some more, but it is nice being able to turn all the way and not worry to much about hitting.
The NX kit is mainly for looks cause the car was built for SEMA. I am trying to finish it all up and get it going. I am figuring out my fuel issue. I know what I need to do, just to lazy to stop and get the parts. LOL

 

I'm going to t tap the line (it turns to plastic for the last 5 feet before the rail).... God willing.... I'm probably going to buy another line (65 Bucks) just to do the work on, so in case I screw something up... I still don't lose drivability.... Once I get that in, I'm good to go, just need to get my wideband O2 set up to ensure it doesn't run too rich or lean...

Mind If I ask where you got the battery terminal setup? and what brand it is? I like the look and will go optima sometime along the line.... and really like those terminals and whatever the wires are wrapped with?

Bouncing ideas..... Please let me know...

 

They are the Lightning Audio terminals.. The cabling is just wrapped in split loom. Here is the model number for them.
LSBCMU2 or LSBCMU1.

 

Nice Sponsor Plug!

Thanks... on my to get this now...

 

actually I work for them... LOL