Scionlife.com
Page 1 of 2
1
2
Show 40 post(s) from this thread on one page

Scionlife.com (https://www.scionlife.com/forums/)
-   Scion tC 1G Forced Induction (https://www.scionlife.com/forums/scion-tc-1g-forced-induction-1645/)
-   -   500HP DD Scion tC with Descendant Turbo Kit (https://www.scionlife.com/forums/scion-tc-1g-forced-induction-1645/500hp-dd-scion-tc-descendant-turbo-kit-216928/)

Kareem_Descendant 08-07-2012 06:51 PM
500HP DD Scion tC with Descendant Turbo Kit
 
2 Attachment(s)
Just finished another 2az engine build from World-Motorsports. Descendant Turbo Kit, Turbonetics GTK-450, World Motor sports Built engine, AEM EMS II, Descendant Return Fuel System on E85, 3" Descendant Exhaust
496whp 432 ft lbs @ 17lbs 6500RPM

http://youtu.be/mxJWi2SxBUE
Attachment 35227Attachment 35228

WORLD-Motorsports West
2170 W.190th Street
Torrance, CA 90504
p. 310.533.8900 ext:236
f. 310.533.8160
__________________
www.DESCENDANT-racing.com
www.WORLD-racing.com
www.WORLD-motorsports.com

BadDudeTC3 08-07-2012 07:18 PM
Very nice #'s!

HOLLOWMANGT69 08-07-2012 07:48 PM
WOW!!!! I want lol. Very nice job

Sent from my DROIDX using Tapatalk 2

FreedomPenguin 08-07-2012 08:11 PM
how much cash would it take for an engine like that?

trd07tc 08-07-2012 09:15 PM
any pics?

scionxbpr 08-07-2012 11:03 PM
Hello,

Hope u r doing GREAT!, Q? here, Is it possible to run W/Meth in the 3/8NPT access port in the middle of the rail?



Originally Posted by Kareem_Descendant (Post 4044516)
Just finished another 2az engine build from World-Motorsports. Descendant Turbo Kit, Turbonetics GTK-450, World Motor sports Built engine, AEM EMS II, Descendant Return Fuel System on E85, 3" Descendant Exhaust
496whp 432 ft lbs @ 17lbs 6500RPM

http://youtu.be/mxJWi2SxBUE
http://i1202.photobucket.com/albums/...1/billypg1.jpghttp://i1202.photobucket.com/albums/...1/billypg2.jpg

WORLD-Motorsports West
2170 W.190th Street
Torrance, CA 90504
p. 310.533.8900 ext:236
f. 310.533.8160
__________________
www.DESCENDANT-racing.com
www.WORLD-racing.com
www.WORLD-motorsports.com

tom0613 08-07-2012 11:07 PM
500 flywheel correct there is no way that even close to the wheels at 17psi. it took me 24psi to see over 520 on a larger turbo.

tom0613 08-07-2012 11:13 PM
also not trying to bash here 500 is 500

blown_xa 08-08-2012 12:35 AM
Originally Posted by tom0613 (Post 4044589)
500 flywheel correct there is no way that even close to the wheels at 17psi. it took me 24psi to see over 520 on a larger turbo.
yea, church's dyno..... lol

emrules2001 08-08-2012 02:31 AM
I prefer to see numbers at the wheels, not the crank, but still a nice looking curve!

Roller_Toaster 08-08-2012 05:23 AM
EXTREMELY impressive!!

sebbyxtc 08-08-2012 01:39 PM
Even with Church's Dynapack it only reads about 17% higher, so he made roughly 470WHP at only 17 PSI... Pretty Impressive if you ask me...Hands down the best Scion Company out there..

tom0613 08-08-2012 06:31 PM
Originally Posted by sebbyxtc (Post 4044764)
Even with Church's Dynapack it only reads about 17% higher, so he made roughly 470WHP at only 17 PSI... Pretty Impressive if you ask me...Hands down the best Scion Company out there..
17% of 500 is is 415 to the wheels. Now that sounds right.

rhythmnsmoke 08-09-2012 12:52 AM
More RPM's and it will be an even better treat. 500 though at 17lbs on Church's dyno.

blown_xa 08-09-2012 02:03 AM
Originally Posted by tom0613 (Post 4044874)
17% of 500 is is 415 to the wheels. Now that sounds right.
Getting dyno numbers from church's dyno, is like shaving your junk..... it makes it look bigger than it really is.

BOOSTit06 08-09-2012 09:26 PM
Originally Posted by blown_xa (Post 4045011)
Getting dyno numbers from church's dyno, is like shaving your junk..... it makes it look bigger than it really is.
No need to start anything in this thread.

blown_xa 08-10-2012 03:19 AM
Originally Posted by BOOSTit06 (Post 4045240)
No need to start anything in this thread.
They ( Churches) have a great tuning tool, and I heard good things about their tuning capabilities. However, Im just putting it in perspective for those who don't know. There is absolutely nothing wrong with that. If anyone doesn't like that I shared that info in a humorous manner... you take me too seriously

trd07tc 08-10-2012 01:27 PM
It is 500 on a turbo rated to 475 at a boost level everyone else is making 420 at.

crush02342002 08-10-2012 04:16 PM
We have had this discussion before folks, no need to beat a dead horse

05rs1 08-23-2012 02:39 PM
Originally Posted by tom0613 (Post 4044874)
17% of 500 is is 415 to the wheels. Now that sounds right.

I was at 410whp @18psi on pump 93 with my precision 6262. I also have the Descendant turbo kit.


All times are GMT. The time now is 09:24 PM.
Page 1 of 2
1
2
Show 40 post(s) from this thread on one page


© 2024 MH Sub I, LLC dba Internet Brands