rjweitzel

i just installed my treadstone turbo kit a week ago and today i stalled twice, im running a 07 auto tc with the greddy rs bov
now my question is will a bpv fix the stalling prob and help my car to run less rich?

gompka

iTrader: (5)

when do you stall? If it was the bov doing it, it would only happen when you shift or let off the gas pedal.

rjweitzel

it happend right after i had a high boost then i was slowing down to make a turn then it stalled

Tc4Eva

Is your BOV recirculated?

rjweitzel

i dont think so i have a breather filter where the hose was originally hooked up on the stock intake

Ace83

iTrader: (6)

yeah try recirculating your bov, what injectors you have?

gingles

iTrader: (1)

i recirculated my bov and it almost never stalls now. i still have to let it engine break for about 2-3 secs after full boost before i push in the clutch to let the fuel stabilize but then it idles fine.

Tc4Eva

Your welcome. Alot of people have this prob, because they do not recirculate it. Happened to my friend so thats how I know how to fix it.

rjweitzel

so i need to weld a bung for that hose after the bov?

rjweitzel

i have the injectors that come with the treadstone kit, on the website it doesnt say what they are

AcidDrop

iTrader: (4)

take a look at the turbonetics turbo kit picture and you will see the BOV with a hose going into the pipe where you put the air filter with the MAF sensor. as for the filter you have on the hose that was from the block to the intake you can just leave that as it is now.

Tc4Eva

You recirculate the BOV between the MAF sensor and the TURBO.

paulky_2000

rjweitzel

see on this pic they dont have a breather they have the hose from the block go to a charge pipe, should i do this too?



heres a pic of mine if it helps any

AcidDrop

iTrader: (4)

looks like you'll need a new pipe unless you make it work somehow with the one you got, add a oil catch can if you can so it won't spilt oil directly and then flow into the turbo.

rjweitzel

i have an oil catch can its behind my engine, but im gonna see if some shop can put a fitting on the charge pipe so i can put the hose from the block instead of having a breather

aen

whose car is that?! what kind of hose clamps are those, i want them

rjweitzel

i googled it lol