chintastictc

pnp

crex149

Okay, you said twice now that the cams don't turn when it cranks? You didn't snap the cam chain did you? If the crank is turning and the cams aren't, I would check that.

Ace83

iTrader: (6)

if it happened all of the sudden it might be the sensor like the code is telling you.. But how bout disconnecting the battery for like 30 mins and then start again, i dont think it would help but just give it a shot

chintastictc

yeh i treid that...same problem....the chain is fine.....i think the crank is not grabbing on to the timing chain...

crex149

If the chain jumped off the crank, then that would also cause the same situation. I know that there was a problem on the xb if running a supercharger, that you could snap the crankshaft pulley alignment pin and it would allow the pulley to spin on the crank under heavy load. I know I ordered a couple of spares when I did my supercharger just to have around. I don't know how the tc engine is assembled exactly, but you may want to check into that.

chintastictc

yeh thats what it looks like ill keep everone updated....i know someone else is gonna run into the same problem...just hope they see this topic lol so they have a general idea