We are going to be using the stock manifold bracing to brace the downpipe and manifold a little better, seing how at 27 psi the motor is moving a whole lot. Just to make sure we dont have to much stress on the manifold and turbo assembly

So my question, how did you guys bolt the stock brace to the dezod downopipe bracket(the bracket near the bottom of the DP).

I cant get my stock brackets to work, I didnt know if there was a simple trick using both stock brackets together in a certain position or not.

thanks

 

longer bracket.

 

27 psi! stock sleeves?!

 

LOL... stock sleeves yes indeed..

Actually, the stock sleeves arent THAT bad, Most ppl resleeve for a safe net. I think 500-550 whp is fine on stock sleeves.

Now as far as the tranny, I dont know how much longer it will hold, though it is fine right now

 

stock bracket doesnt work.. i already tried.

 

Yes I see it doesnt work now. I even bolted the stock turbo back up in case it changed the position, but it didnt work.. way off

 

so when you buy it, it doesnt fit? or it comes with brackets and you lost them.. just trying to clarify so people dont think the kit is missing peices when you buy it!

 

the kit doesnt come with brackets for the DP