Scionlife.com
Page 1 of 2
1
2
Show 40 post(s) from this thread on one page

Scionlife.com (https://www.scionlife.com/forums/)
-   Scion tC 1G Forced Induction (https://www.scionlife.com/forums/scion-tc-1g-forced-induction-1645/)
-   -   Final numbers with dyno vids (https://www.scionlife.com/forums/scion-tc-1g-forced-induction-1645/final-numbers-dyno-vids-177938/)

Blue_TC_Man 12-21-2009 06:48 PM
Final numbers with dyno vids
 
Garrett t3/t4 60 trim .63 a/r
8.7 psi spring making 9 psi
272whp 26Xwtq

Ill post up the dyno sheet and some videos when I get them in my email im happy with the numbers

highvoltage1 12-21-2009 06:52 PM
Not bad man! Down for pics and vids!!

crush02342002 12-21-2009 07:02 PM
not bad bro...good work

game-over 12-21-2009 07:48 PM
nice homie..
what kit are you running or is it custom

Blue_TC_Man 12-21-2009 07:59 PM
its custom, emusa intercooler kit
OBX??? mani, downpipe, and s-pipe Idk if its a look alike or is an OBX system but welds look great and it fits well
forge fmdv004 BOV
siemens 630cc injectors
garrett turbo
tial wastegate
AEM f/ic

car also has dumped exhaust
agency power pulley
and gutted interior

Blue_TC_Man 12-22-2009 03:06 AM
heres the dyno vids

http://www.youtube.com/watch?v=1a4t2sscNE8
http://www.youtube.com/watch?v=iLi42t0xc5U

m6ar2cel6oTC 12-22-2009 05:14 AM
what dyno was it on? good numbers bro. be careful with that emotorusa intercooler kit. lol i have the same one and mines didnt fit good plus it blows off alot. invest in some t-bolt clamps if you haven't yet.

B_Real45 12-22-2009 01:02 PM
Very nice, elliot!

game-over 12-22-2009 01:11 PM
im assuming.. a dyno jet... thats what it says in the background of the video

Blue_TC_Man 12-22-2009 03:27 PM
Originally Posted by m6ar2cel6oTC (Post 3408798)
what dyno was it on? good numbers bro. be careful with that emotorusa intercooler kit. lol i have the same one and mines didnt fit good plus it blows off alot. invest in some t-bolt clamps if you haven't yet.
yeah its a dynojet, yeah it fits on the passenger side like poo lol. I got the correct sized couplers and t-bolt clamps and its done fine


thanks rob

m6ar2cel6oTC 12-22-2009 03:34 PM
Originally Posted by game-over (Post 3408918)
im assuming.. a dyno jet... thats what it says in the background of the video
lol yea that was a dumb question should have looked at the video better.

Originally Posted by Blue_TC_Man (Post 3409028)
yeah its a dynojet, yeah it fits on the passenger side like poo lol. I got the correct sized couplers and t-bolt clamps and its done fine


thanks rob
well mines started poping out when i was like at 13psi with my turbo so i dunno. either way good numbers.

Blue_TC_Man 12-22-2009 03:57 PM
Originally Posted by m6ar2cel6oTC (Post 3409032)
lol yea that was a dumb question should have looked at the video better.



well mines started poping out when i was like at 13psi with my turbo so i dunno. either way good numbers.
thanks man, yeah they were bad to pop out at 3psi before i got real t-bolts, there couplers are also the wrong size. so I got one that had a tight fit, and used the hairspray trick

m6ar2cel6oTC 12-22-2009 04:43 PM
Yea that hairspray trick works lol. B_real told me about that.

ElevationTC 12-22-2009 04:52 PM
Did that basemap work for you?

Blue_TC_Man 12-22-2009 05:34 PM
yeah when I read the hairspray trick I was like uhh might as well try it, didnt think it would do anything though

Originally Posted by ElevationTC (Post 3409076)
Did that basemap work for you?
worked great man, got me over there and took him about 2.5 hours to get me perfect not counting fixing the little things

B_Real45 12-22-2009 05:59 PM
Originally Posted by Blue_TC_Man (Post 3409098)
yeah when I read the hairspray trick I was like uhh might as well try it, didnt think it would do anything though
Yeah it's a pretty oldschool trick. glad it worked out!

ElevationTC 12-22-2009 06:06 PM
Originally Posted by Blue_TC_Man (Post 3409098)
yeah when I read the hairspray trick I was like uhh might as well try it, didnt think it would do anything though



worked great man, got me over there and took him about 2.5 hours to get me perfect not counting fixing the little things

Very good to hear :) not bad for guessing ;)

Blue_TC_Man 12-22-2009 06:22 PM
Originally Posted by ElevationTC (Post 3409126)
Very good to hear :) not bad for guessing ;)
not bad at all

tcchris38 12-22-2009 09:32 PM
Good numbers! Hard to belive how much a motor moves

Blue_TC_Man 12-23-2009 09:24 PM
Originally Posted by tcchris38 (Post 3409300)
Good numbers! Hard to belive how much a motor moves
yeah I need mounts bad, or at least inserts. I had a tq dampener but I broke the bracket


All times are GMT. The time now is 09:13 PM.
Page 1 of 2
1
2
Show 40 post(s) from this thread on one page


© 2024 MH Sub I, LLC dba Internet Brands