hey guys, id love to get your input on what numbers you think I could get with my setup. Im going to be finishing it in a month or so

-Garrett T3t04e with .63 a/r and .60 a/r compressor side
-2.5 inch down pipe
-3 inch exhaust piping rest of the way back with high flow cat
-630CC injectors
-AEM water/meth injection
-LOG style manifold
-2.5 inch intercooler piping
-Greddy ultimate w/ Pressure sensor

Im going to get the car tuned at 12 psi. My goal is to break the 300whp mark. Let me hear what you guys think

 

from what i have learned that should put you over 300WHP

 

Yeah, I dont wanna get greedy with my guess but Im think maybe I could reach 315?

 

im going to guess 297

 

what trim?

 

im going to say your going to be able to go faster then the speed of light.. good luck superman

 

280-300 get bigger turbo!!!!

 

you should be over 300hp, maybe around 320 ish.. depends on other factors like tuner, dyno, weather and such.. on a cold weather and meth i expect a pretty decent one. you have a standard right?

 

Realistically, you'll be in the 280-300 range, pre-dyno fluff.

 

290ish range

 

298-310

 

Not really, a small 16G turbo under the same conditions would go over 300whp, so don't see why he couldn't get over 300 with the current turbo.

 

Sorry, forgot to mention its a 60 trim. Hope this helps



what do you mean a standard?

yeah, from other turbo kits on here it seems like mine is slightly over the average size, maybe if I build my engine id get a bigger turbocharger

 

are you sure you want to go turbo? JK

but thats sounds good for your goal of 300hp

 

^^btw he meant what tranny you have

 

haha ive been on this forum for a while and I dont remember hearing that before but im manual trans. The cars already boosted, its just now at .4bar and really mild

 

yeah i meant the tranny standard aka 5 speed manual lol.. but yeah if your tuner is good and everything in your setup and motor is good without issues you will be at least sitting happy around 300-320 regardless of dyno type.. 12 psi should be a good spot for your turbo size

 

 

148whp

 

be specific 148rwhp lol