I am getting some good prices on a T25 turbo and a 30x6x2 intercooler and I have a few questions as this is not my are of expertise. I really only want 250 horsepower and I will be happy. Any help is appreciated. Thanks

Is there any companies out there that has a manifold for a T25 turbo? I believe it uses the same four bolt pattern as the 16g so could I use that manifold for my t25?

Will a 30x6x2 intercooler will fit in our stock front bumper?

 

Talk to either Todd @ Turbo Toyota's or Paul @ Dezod, they will be able to help you out.

 

The flanges are not the same....

Who makes your T25? is it off a Nissan by chance? OE style?

If its a true T25 turbo it has a T25 style flange.....

My Greddy replacement manifold is the only manifold I currently offer with a T25 flange.

Your intercooler will fit

Regards-

Todd

 

The T25 is off a mitsu that is why I was led that it will use the same flange as the 16g.

I saw your manifold on the website and I believe you are prolly the only one that has one.

BTW I just emailed you the same questions.
Thanks

 

will i have to trim the crash bar?

 

You shouldn't have too...that sounds to be about the same size as the dezod inter cooler..actually sounds a little smaller...so you should be ok.

 

I still plan to use the intercooler no matter what, I will cut the crash bar if I have too. Hopefully I can get this project done this summer.

Todd,

IF it is off an eclipse do you think it can use the 16g flange?

 

hey buddy, t25 off a 2g dsm which is a t25 flange and isnt interchangleable with the more powerful mitsu turbos like 16g, 14b, 20g. better off getting a t3 so u dont have to spend an arm and a leg for a manifold. the intercooler is a little thin but it should work decent for 250hp range

 

I am only looking for around 250 hp. I have an auto tc so I don't want to run to much power. Just enough to make me happy