Need help with Code P0441
#1
Need help with Code P0441
hey whats up well i was driving home today and not boosting and my CEL comes on, well i check it and its a "P0441 Evaporative emission control system incorrect purge flow".
my question is what the does thta mean and how do i fix it. my car is an 08 and its Supercharged. i have the 9.5 pulley, header, intake. please help lol i hate my car.
my question is what the does thta mean and how do i fix it. my car is an 08 and its Supercharged. i have the 9.5 pulley, header, intake. please help lol i hate my car.
Last edited by MR_LUV; 10-20-2017 at 09:28 AM. Reason: typo
#6
If it was the gas cap, the code would be "small leak".
A code P0441 could mean one or more of the following has happened:
1) Bad vacuum switch
2) Broken or damaged EVAP line or canister
3) Open in PCM purge command circuit
4) Open or short in Voltage feed circuit to Purge Solenoid
5) Faulty purge solenoid
6) Restriction in EVAP solenoid, line or canister
7) Corrosion or resistance in purge connector
Bad PCM
Usually, for a code like this, it would just be the Evap Canister or Purge Solenoid.
A code P0441 could mean one or more of the following has happened:
1) Bad vacuum switch
2) Broken or damaged EVAP line or canister
3) Open in PCM purge command circuit
4) Open or short in Voltage feed circuit to Purge Solenoid
5) Faulty purge solenoid
6) Restriction in EVAP solenoid, line or canister
7) Corrosion or resistance in purge connector
Bad PCM
Usually, for a code like this, it would just be the Evap Canister or Purge Solenoid.
Last edited by N0AuTHoRiTy; 08-12-2009 at 05:51 AM. Reason: Forgot number 8
#7
If it was the gas cap, the code would be "small leak".
A code P0441 could mean one or more of the following has happened:
1) Bad vacuum switch
2) Broken or damaged EVAP line or canister
3) Open in PCM purge command circuit
4) Open or short in Voltage feed circuit to Purge Solenoid
5) Faulty purge solenoid
6) Restriction in EVAP solenoid, line or canister
7) Corrosion or resistance in purge connector
Bad PCM
Usually, for a code like this, it would just be the Evap Canister or Purge Solenoid.
A code P0441 could mean one or more of the following has happened:
1) Bad vacuum switch
2) Broken or damaged EVAP line or canister
3) Open in PCM purge command circuit
4) Open or short in Voltage feed circuit to Purge Solenoid
5) Faulty purge solenoid
6) Restriction in EVAP solenoid, line or canister
7) Corrosion or resistance in purge connector
Bad PCM
Usually, for a code like this, it would just be the Evap Canister or Purge Solenoid.
had this same problem for half a year now. this check list is the best info ive gotten scine then, thx ill look into it.
#13
dont mean to bump an old thread (IM NOT A NOOB!!!) but which line was piched that threw this code for you??? im throwing the same code and have checked the lines and they all seem fine...
#16
i did it myself. its in the engine bay. kinda by the throttle body, its a little box that has a couple hoses connected to it. u can follow ur vac. line to find it. here is a pic of it. only pic i could find that has it.
#17
oh ok i know what vac lines those are now... they were fine on my car... the CEL light seemed to go away when i re-tightened my gas cap. i guess i didnt tighten it up the last time i filled up, but thanks for the help!
Thread
Thread Starter
Forum
Replies
Last Post
wayneside
Regional - Pacific Northwest
0
09-23-2015 10:29 AM