Ok guy i need help!

Which items do i need to tap my oil pan.. an which oil lines do i need to complete everything? . Thank you

 

TRD sells a pre-tapped oil pan. I think dezod might carry them as well as trdsparks.

 

i checked dezod but they want 175 for a tapped oil pan i think thats alot

 

i have an oil pan....its untapped but i can tap it for you for much less than 175....

 

I'm sorry for jacking this thread.
But what exactly does it mean when you tap an oil pan?

 

That price includes the cost of the pan, plus the fitting and installation. A full drop in deal. It's up to you. Pan alone will be over $100

 

put a fitting in it for an oil return line....

 

So if u guys tap it all i need to buy is the oil feed an drain lines that u sell under ur forced induction section for the scion tc an im good 2 go??

 

You've got it sir!

 

^ that's why I recommended Dezod.

 

more precisely. you drill out a hole in your oil pan for you oil drain line, then use a tap to make a thread for your chosen fitting, then you screw in the fitting and clamp the oil drain line onto the fitting for proper oil drainage from the turbo.

 

what kind of fitting is it that goes into it just a straight hollow fitting or what

 

http://www.dezod.com/pd-dezod-motorsports-swivel.cfm

Ok so if i buy this then it comes with all the parts 2 tap my own oil pan right??? imm so comfused haha

 

yea i think so....ill sell you a stock oil pan that you can tap so that you are not using your only pan...