Scionriderz

Okay my buddy of mine wants to grab himself a turbo but doesn;t want to follow me in getting the turbonetics so we looked into zpi the one thing that scares him is that the site we were at (TURBO-KITS.COM) said the kit pops a cel and isn;t fixable with the sensor they sell....is it true that the kit does this and how do you fix it thanks

318_tC

i have a CEL on 24/7 no cats baby!

j3st3r

iTrader: (1)

Should not be a problem....but my question for you is...why dont you go to the source and ask these questions? A quick call to them would answer any questions you might have on stuff like this.

rhythmnsmoke

^^+1

ERIC-TC

I have a ZPI stage 0 and got a CEL only on the first day after installing the kit. 2nd Day did the anti-fouler mod and I have not had any more cel's.

Got about 6 months on the kit and still no cel.

yamaha16bw

Yea that should fix the problem for the CEL that it would give the car. If you didnt have the antifouler on that came with the turbonetics kit you would get the same CEL code.

Scionriderz

i see is the antifouler you guys use the same as the one i got when i purchased my headers if so then i can just use that.....and as for calling them i live in guam so calling off-island means i have to pay....so i'd just rather get the info for free but thats just me hahah

Scionriderz

Oh yeah its alittle off topic but my kit will be here on thursday...so what guages do you guys recommend getting cause i've seen tc's(non turbo) here that have a crap load of guages including a tach hahahah

burninskulls0911

boost,AFR,oil pressure

rhythmnsmoke

They have their own forum too.

http://www.zeropointindustries.net/forum/

Scionriderz

sorry don;t know much about zpi so i didn;t know they had a site i thought it was a custom built turbo from turbo-kits.com
thanks man

Robs_tc

If you get an anti-fouler, I'd pick up MMW's. It's welded at a 90 degree angle but just as long as turbonetics.

rhythmnsmoke

^^no problem. ZPI is one of the companies you should get to know. Perhaps the fastest Scions on the street come out of their shop.

Robs_tc

^^ This is true. Never once doubted their ability to tune and make a solid turbo kit. Most of their kits run more PSI though.

rhythmnsmoke

What do you mean? Stage 0 - 6 PSI. Stage 1 - 8 to 10 PSI. Same as all the rest.

Robs_tc

Sorry I thought they came set at 10psi. I just checked the site and they specify 9-10psi. The thought of running a stock stage 0, no fuel management, still scares me but it works.

How much whp was the 12sec (1bar boost) tC running that I've seen on their web site?

rhythmnsmoke

What does it matter as long as it runs low 12's almost 11's right...

Robs_tc

It really doen't matter, track time is everything. I'm just curious.

Streeter

This thread jacked twice!

Anti-fouler. I still have to do it but yea, it works.